BARRIENTOS-DIEZ, J., RUSSO, M., DONG, X., AXINTE, D. and KELL, J., 2023. Asymmetric Continuum Robots: IEEE Robotics and Automation Letters IEEE Robotics and Automation Letters. 1-8 YANG, Y., BILLINGHAM, J., AXINTE, D. and LIAO, Z., 2023. A rational approach to beam path planning in additive manufacturing: The inverse heat placement problem: Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences. 479(2270), ZAN, S. S., LIAO, Z. R., ROBLES-LINARES, J. A., LUNA, G. G. and AXINTE, D., 2023. Machining of long ceramic fibre reinforced metal matrix composites - How could temperature influence the cutting mechanisms?: International Journal of Machine Tools & Manufacture International Journal of Machine Tools & Manufacture. 185, SANCHEZ, I., AXINTE, D., LIAO, Z., GAVALDA-DIAZ, O. and SMITH, R., 2023. The effect of high strain rate impact in Yttria stabilized zirconia: Materials and Design Materials and Design. 229, ZHANG, B., LU, S., RABIEY, M., AXINTE, D. and BLEICHER, F., 2023. Grinding of composite materials: CIRP Annals CIRP Annals. LI, L., CHEN, H., LIAO, Z., YANG, Y. and AXINTE, D., 2023. Investigation of the grain deformation to orthogonal cutting process of the textured Alloy 718 fabricated by laser powder bed fusion: International Journal of Machine Tools and Manufacture International Journal of Machine Tools and Manufacture. 190, ZAN, S. S., LIU, G. Y., LIAO, Z. R., AXINTE, D. and FANG, F. Z., 2023. Inverse size effect and deformation mechanism in Ti-6Al-4V cutting process- investigation on effect of bimodal microstructure on machining: Cirp Annals-Manufacturing Technology Cirp Annals-Manufacturing Technology. 72(1), 41-44 HAN, X., LIAO, Z., LUNA, G. G., LI, H. N. and AXINTE, D., 2022. Towards the understanding the effect of surface integrity on the fatigue performance of silicon carbide particle reinforced aluminium matrix composites: Journal of Manufacturing Processes Journal of Manufacturing Processes. 73, 518-530 DONG, X., WANG, M., MOHAMMAD, A., BA, W., RUSSO, M., NORTON, A., KELL, J. and AXINTE, D., 2022. Continuum Robots Collaborate for Safe Manipulation of High-Temperature Flame to Enable Repairs in Challenging Environments: IEEE/ASME Transactions on Mechatronics IEEE/ASME Transactions on Mechatronics. LA MONACA, A., AXINTE, D. A., LIAO, Z. R., M'SAOUBI, R. and HARDY, M. C., 2022. Temperature-dependent shear localisation and microstructural evolution in machining of nickel-base superalloys: Materials & Design Materials & Design. 219, ABBA, E., SPEIDEL, A., LIAO, Z. R., AXINTE, D. and NOVOVIC, D., 2022. A bar of cutting fluid: Deep Eutectic Fluids with a novel flavour: Materials Today Advances Materials Today Advances. 16, ATIA, M. G. B., MOHAMMAD, A., GAMEROS, A., AXINTE, D. and WRIGHT, I., 2022. Reconfigurable Soft Robots by Building Blocks: Advanced Science Advanced Science. WEI, W., ROBLES-LINARES, J. A., LIAO, Z., WANG, Z., LUNA, G. G., BILLINGHAM, J. and AXINTE, D., 2022. On modelling coolant penetration into the microchannels at the tool-workpiece interface: Journal of Manufacturing Processes Journal of Manufacturing Processes. 84, 43-54 TRONCOSO, D. A., ROBLES-LINARES, J. A., RUSSO, M., ELBANNA, M. A., WILD, S., DONG, X., MOHAMMAD, A., KELL, J., NORTON, A. D. and AXINTE, D., 2022. A Continuum Robot for Remote Applications: From Industrial to Medical Surgery With Slender Continuum Robots: IEEE Robotics and Automation Magazine IEEE Robotics and Automation Magazine. 2-13 WANG, M., DONG, X., BA, W., MOHAMMAD, A., AXINTE, D. and NORTON, A., 2021. Design, modelling and validation of a novel extra slender continuum robot for in-situ inspection and repair in aeroengine: Robotics and Computer-Integrated Manufacturing Robotics and Computer-Integrated Manufacturing. 67, BARRIENTOS-DIEZ, J., DONG, X., AXINTE, D. and KELL, J., 2021. Real-Time Kinematics of Continuum Robots: Modelling and Validation: Robotics and Computer-Integrated Manufacturing Robotics and Computer-Integrated Manufacturing. 67, 12 HAN, X., XU, D. D., AXINTE, D., LIAO, Z. R. and LI, H. N., 2021. On understanding the specific cutting mechanisms governing the workpiece surface integrity in metal matrix composites machining: Journal of Materials Processing Technology Journal of Materials Processing Technology. 288, 15 RUSSO, M., RAIMONDI, L., DONG, X., AXINTE, D. and KELL, J., 2021. Task-oriented optimal dimensional synthesis of robotic manipulators with limited mobility: Robotics and Computer-Integrated Manufacturing Robotics and Computer-Integrated Manufacturing. 69, ZHIRONG LIAO, ANDREA LA MONACA, JAMES MURRAY, ALISTAIR SPEIDEL, DMITRII USHMAEV, ADAM CLARE, DRAGOS AXINTE and RACHID M'SAOUBI, 2021. Surface integrity in metal machining - Part I: Fundamentals of surface characteristics and formation mechanisms International Journal of Machine Tools and Manufacture. 103687 LACHOWICZ, D. S., BENNETT, C., AXINTE, D. A., LOWTH, S., WALPOLE, A. and HANNON, C., 2021. On the influence of tooling behaviour over axial shortening mechanisms in linear friction welding of titanium alloys and modelling plasticisation effects: International Journal of Machine Tools and Manufacture International Journal of Machine Tools and Manufacture. 161, BA, W., DONG, X., MOHAMMAD, A., WANG, M., AXINTE, D. and NORTON, A., 2021. Design and validation of a novel fuzzy-logic-based static feedback controller for tendon-driven continuum robots: IEEE/ASME Transactions on Mechatronics IEEE/ASME Transactions on Mechatronics. RAIMONDI, L., BENNETT, C. J., AXINTE, D., GAMEROS, A. and STEVENS, P. A., 2021. Development of a novel monitoring system for the in-process characterisation of the machine and tooling effects in Inertia Friction Welding (IFW): Mechanical Systems and Signal Processing Mechanical Systems and Signal Processing. 156, XU, D., EDWARDS, T. E. J., LIAO, Z., MAEDER, X., RAMACHANDRAMOORTHY, R., JAIN, M., MICHLER, J. and AXINTE, D., 2021. Revealing Nanoscale deformation mechanisms caused by shear-based material removal on individual grains of a Ni-based superalloy: Acta Materialia Acta Materialia. 212, MONACA, A. L., MURRAY, J. W., LIAO, Z. R., SPEIDEL, A., ROBLES-LINARES, J. A., AXINTE, D. A., HARDY, M. C. and CLARE, A. T., 2021. Surface integrity in metal machining-Part II: Functional performance: International Journal of Machine Tools & Manufacture International Journal of Machine Tools & Manufacture. 164, 55 ANDREA LA MONACA, DRAGOS A. AXINTE, ZHIRONG LIAO, RACHID M'SAOUBI and MARK C. HARDY, 2021. Towards understanding the thermal history of microstructural surface deformation when cutting a next generation powder metallurgy nickel-base superalloy International Journal of Machine Tools and Manufacture. 103765 BIANCHI, M. F., GAMEROS, A. A., AXINTE, D. A., LOWTH, S., CENDROWICZ, A. M. and WELCH, S. T., 2021. Regional temperature control in ceramic injection moulding: An approach based on cooling rate optimisation: Journal of Manufacturing Processes Journal of Manufacturing Processes. 68, 1767-1783 KRAJNIK, P., HASHIMOTO, F., KARPUSCHEWSKI, B., DA SILVA, E. J. and AXINTE, D., 2021. Grinding and fine finishing of future automotive powertrain components: CIRP Annals CIRP Annals. MOHAMMAD, A., RUSSO, M., FANG, Y., DONG, X., AXINTE, D. and KELL, J., 2021. An efficient follow-the-leader strategy for continuum robot navigation and coiling: IEEE Robotics and Automation Letters IEEE Robotics and Automation Letters. LIAO, Z., XU, D., LUNA, G. G., AXINTE, D., AUGUSTINAVICIUS, G., SARASUA, J. A. and WRETLAND, A., 2021. Influence of surface integrity induced by multiple machining processes upon the fatigue performance of a nickel based superalloy: Journal of Materials Processing Technology Journal of Materials Processing Technology. 298, WINTER, K., LIAO, Z., RAMANATHAN, R., AXINTE, D., VAKIL, G. and GERADA, C., 2021. How non-conventional machining affects the surface integrity and magnetic properties of non-oriented electrical steel: Materials and Design Materials and Design. 210, WANG, Z., LIAO, Z., AXINTE, D., DONG, X., XU, D. and AUGUSTINAVICIUS, G., 2021. Analytical model for predicting residual stresses in abrasive waterjet peening: Materials and Design Materials and Design. 212, RUSSO, M., SRIRATANASAK, N., BA, W., DONG, X., MOHAMMAD, A. and AXINTE, D., 2021. Cooperative continuum robots: Enhancing individual continuum arms by reconfiguring into a parallel manipulator: IEEE Robotics and Automation Letters Ieee Robotics and Automation Letters. CRAIG, O., PICAVEA, J., GAMEROS, A., AXINTE, D. and LOWTH, S., 2020. Conformable fixture systems with flexure pins for improved workpiece damping: Journal of Manufacturing Processes Journal of Manufacturing Processes. 50, 638-652 YANG, Y., LI, H., LIAO, Z., AXINTE, D., ZHU, W. and BEAUCAMP, A., 2020. Controlling of compliant grinding for low-rigidity components: International Journal of Machine Tools and Manufacture International Journal of Machine Tools and Manufacture. 152, XU, D., LIAO, Z., AXINTE, D., SARASUA, J. A., M'SAOUBI, R. and WRETLAND, A., 2020. Investigation of surface integrity in laser-assisted machining of nickel based superalloy: Materials and Design Materials and Design. 194, LIAO, Z., SANCHEZ, I., XU, D., AXINTE, D., AUGUSTINAVICIUS, G. and WRETLAND, A., 2020. Dual-processing by abrasive waterjet machining—A method for machining and surface modification of nickel-based superalloy: Journal of Materials Processing Technology Journal of Materials Processing Technology. 285, LIAO, Z. R., SANCHEZ, I., XU, D. D., AXINTE, D., AUGUSTINAVICIUS, G. and WRETLAND, A., 2020. Dual-processing by abrasive waterjet machining-A method for machining and surface modification of nickel-based superalloy: Journal of Materials Processing Technology Journal of Materials Processing Technology. 285, 14 LIAO, Z., XU, D., AXINTE, D., M'SAOUBI, R., THELIN, J. and WRETLAND, A., 2020. Novel cutting inserts with multi-channel irrigation at the chip-tool interface: Modelling, design and experiments: CIRP Annals CIRP Annals. 69(1), 65-68 BACHAROUDIS, K. C., BAINBRIDGE, D., TURNER, A., POPOV, A. A. and RATCHEV, S. M., 2020. Implementation of dimensional management methodology and optimisation algorithms for pre-drilled hinge line interfaces of critical aero assemblies – A case study: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. SHANG, Z., LIAO, Z., SARASUA, J. A., BILLINGHAM, J. and AXINTE, D., 2019. On modelling of laser assisted machining: Forward and inverse problems for heat placement control: International Journal of Machine Tools and Manufacture International Journal of Machine Tools and Manufacture. 138, 36-50 BIANCHI, M. F., GAMEROS, A. A., AXINTE, D. A., LOWTH, S., CENDROWICZ, A. M. and WELCH, S. T., 2019. On the effect of mould temperature on the orientation and packing of particles in ceramic injection moulding: Journal of the European Ceramic Society Journal of the European Ceramic Society. ZHU, W. L., YANG, Y., LI, H. N., AXINTE, D. and BEAUCAMP, A., 2019. Theoretical and experimental investigation of material removal mechanism in compliant shape adaptive grinding process: International Journal of Machine Tools and Manufacture International Journal of Machine Tools and Manufacture. 142, 76-97 AXINTE, D., GUO, Y., LIAO, Z., SHIH, A. J., M'SAOUBI, R. and SUGITA, N., 2019. Machining of biocompatible materials — Recent advances: CIRP Annals CIRP Annals. LIAO, Z., ABDELHAFEEZ, A., LI, H., YANG, Y., DIAZ, O. G. and AXINTE, D., 2019. State-of-the-art of surface integrity in machining of metal matrix composites: International Journal of Machine Tools and Manufacture International Journal of Machine Tools and Manufacture. 143, 63-91 AURICH, J. C., KIRSCH, B., SETTI, D., AXINTE, D., BEAUCAMP, A., BUTLER-SMITH, P. and YAMAGUCHI, H., 2019. Abrasive processes for micro parts and structures: CIRP Annals CIRP Annals. LIAO, Z., POLYAKOV, M., DIAZ, O. G., AXINTE, D., MOHANTY, G., MAEDER, X., MICHLER, J. and HARDY, M., 2019. Grain refinement mechanism of nickel-based superalloy by severe plastic deformation - Mechanical machining case: Acta Materialia Acta Materialia. 180, 2-14 MA, N., DONG, X., PALMER, D., ARREGUIN, J. C., LIAO, Z., WANG, M. and AXINTE, D., 2019. Parametric vibration analysis and validation for a novel portable hexapod machine tool attached to surfaces with unequal stiffness: Journal of Manufacturing Processes Journal of Manufacturing Processes. 47, 192-201 YANG, Y., LI, H., LIAO, Z. and AXINTE, D., 2019. A curious observation of phenomena occurring during lapping/polishing processes: Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences. 475(2230), CADOT, G. B. J., THOMAS, K., BEST, J. P., TAYLOR, A. A., MICHLER, J., AXINTE, D. A. and BILLINGHAM, J., 2018. Investigation of the microstructure change due to phase transition in nanosecond pulsed laser processing of diamond: Carbon Carbon. 127, 349-365 AXINTE, D., DONG, X., PALMER, D., RUSHWORTH, A., OLARRA, A., ARIZAGA, I., GOMEZ-ACEDO, E., TXOPERENA, K., PFEIFFER, K. and MESSMER, F., 2018. MiRoR - Miniaturised Robotic systems for holistic in-situ Repair and maintenance works in restrained and hazardous environments: IEEE/ASME Transactions on Mechatronics IEEE/ASME Transactions on Mechatronics. LUO, M., LUO, H., AXINTE, D., LIU, D., MEI, J. and LIAO, Z., 2018. A wireless instrumented milling cutter system with embedded PVDF sensors: Mechanical Systems and Signal Processing Mechanical Systems and Signal Processing. 110, 556-568 LIAO, Z., AXINTE, D., MIESZALA, M., M'SAOUBI, R., ABELHAFEEZ, A., MICHLER, J. and HARDY, M., 2018. On the influence of gamma prime upon machining of advanced nickel based superalloy: CIRP Annals CIRP Annals. FANICCHIA, F., MAEDER, X., AST, J., TAYLOR, A. A., GUO, Y., POLYAKOV, M. N., MICHLER, J. and AXINTE, D. A., 2018. Residual stress and adhesion of thermal spray coatings: Microscopic view by solidification and crystallisation analysis in the epitaxial CoNiCrAlY single splat: Materials and Design Materials and Design. 153, 36-46 ALATORRE TRONCOSO, D., NASSER, B., RABANI, A., NAGY, A., DONG, X., AXINTE, D. and KELL, J., 2018. Teleoperated, In Situ Repair of an Aeroengine: Overcoming the Internet Latency Hurdle: IEEE Robotics and Automation Magazine IEEE Robotics and Automation Magazine. ALATORRE, D., NASSER, B., RABANI, A., NAGY-SOCHACKI, A., DONG, X., AXINTE, D. and KELL, J., 2018. Robotic Boreblending: The Future of In-Situ Gas Turbine Repair WANG, M., PALMER, D., DONG, X., ALATORRE, D., AXINTE, D. and NORTON, A., 2018. Design and Development of a Slender Dual-Structure Continuum Robot for In-Situ Aeroengine Repair In: 5648-5653 DONG, X., AXINTE, D., PALMER, D., COBOS, S., RAFFLES, M., RABANI, A. and KELL, J., 2017. Development of a slender continuum robotic system for on-wing inspection/repair of gas turbine engines: Robotics and Computer-Integrated Manufacturing Robotics and Computer-Integrated Manufacturing. 44, 218-229 FANICCHIA, F., AXINTE, D. A., KELL, J., MCINTYRE, R., BREWSTER, G. and NORTON, A. D., 2017. Combustion Flame Spray of CoNiCrAlY & YSZ coatings: Surface and Coatings Technology Surface and Coatings Technology. 315, 546-557 GAMEROS, A. A., AXINTE, D., SILLER, H. R., LOWTH, S. and WINTON, P., 2017. Experimental and Numerical Study of a Fixturing System for Complex Geometry and Low Stiffness Components: Journal of Manufacturing Science and Engineering-Transactions of the Asme Journal of Manufacturing Science and Engineering-Transactions of the Asme. 139(4), 12 ZHOU, Y. C., AXINTE, D., BUTLER-SMITH, P., JESSEN, E. and NORBYGAARD, T., 2017. Effects of novel rotary-abrasive finishing pad textures on the controlled 2-body abrasive wear of Type 304 stainless steel (February, pg 89, 2016): Wear Wear. 372, 216-217 ADDEPALLI, S., ROY, R., AXINTE, D. and MEHNEN, J., 2017. 'In-situ' inspection technologies: Trends in degradation assessment and associated technologies. In: ROY, R., TOMIYAMA, T., TIWARI, A., TRACHT, K., SHEHAB, E., MEHNEN, J., ERKOYUNCU, J. A. and TAPOGLOU, N., eds., Proceedings of the 5th International Conference in through-Life Engineering Services 59. Elsevier Science Bv. 35-40 MIESZALA, M., TORRUBIA, P. L., AXINTE, D. A., SCHWIEDRZIK, J. J., GUO, Y., MISCHLER, S., MICHLER, J. and PHILIPPE, L., 2017. Erosion mechanisms during abrasive waterjet machining: Model microstructures and single particle experiments: Journal of Materials Processing Technology Journal of Materials Processing Technology. 247, 92-102 ZHOU, Y. C., AXINTE, D., BUTLER-SMITH, P., JESSEN, E. and NORBYGAARD, T., 2017. Effects of novel rotary-abrasive finishing pad textures on the controlled 2-body abrasive wear of Type 304 stainless steel (vol 348, pg 89, 2016): Wear Wear. 386-387, 247-249 GAMEROS, A., LOWTH, S., AXINTE, D., NAGY-SOCHACKI, A., CRAIG, O. and SILLER, H. R., 2017. State-of-the-art in fixture systems for the manufacture and assembly of rigid components: A review 123, 1-21 A. BILBAO-GUILLERNA, R.T. EACHAMBADI, G.B.J. CADOT, D.A. AXINTE, J. BILLINGHAM, F. STUMPF, S. BEUER and M. ROMMEL, 2017. Novel approach based on continuous trench modelling to predict focused ion beam prepared freeform surfaces Journal of Materials Processing Technology. DRAGOS AXINTE, JOHN BILLINGHAM and BILBAO GUILLERNA, 2017. New models for energy beam machining enable accurate generation of free forms SCIENCE ADVANCES. 3(9), 1 to 7 ZHOU, Y., AXINTE, D., BUTLER-SMITH, P., JESSEN, E. and NORBYGAARD, T., 2016. Effects of novel rotary-abrasive finishing pad textures on the controlled 2-body abrasive wear of Type 304 stainless steel: Wear Wear. 348-349, 89-97 TORRUBIA, P. L., BILLINGHAM, J. and AXINTE, D. A., 2016. Stochastic simplified modelling of abrasive waterjet footprints: Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences. 472(2186), BUTLER-SMITH, P., WARHANEK, M., AXINTE, D., FAY, M., BUCOURT, J. F., RAGUENEAU, R. and WEGENER, K., 2016. The influences of pulsed-laser-ablation and electro-discharge-grinding processes on the cutting performances of polycrystalline diamond micro-drills: CIRP Annals - Manufacturing Technology CIRP Annals - Manufacturing Technology. DONG, X., RAFFLES, M., COBOS-GUZMAN, S., AXINTE, D. and KELL, J., 2016. A Novel Continuum Robot Using Twin-Pivot Compliant Joints: Design, Modeling, and Validation: Journal of Mechanisms and Robotics-Transactions of the Asme 8(2), STOESSLEIN, M., AXINTE, D. A. and BILBAO GUILLERNA, A., 2016. Pulsed laser ablation as a tool for in-situ balancing of rotating parts: Mechatronics Mechatronics. 38, 54-67 LI, H. N. and AXINTE, D., 2016. Textured grinding wheels: A review: International Journal of Machine Tools and Manufacture International Journal of Machine Tools and Manufacture. 109, 8-35 LOWTH S and D AXINTE, 2015. An investigation into the influence of inter-component assembly gaps upon the geometry of tack welded annular structures Annals of CIRP. 1, (In Press.)
F KLOCKE, L SOO, B KARPUSCHEWSKI, J WEBSTER and D NOVOVIC, 2015. Abrasive machining of advanced aerospace alloys and composites Annals of CIRP. 2, (In Press.)
R M’SAOUBI R, D AXINTE, L SOO, C NOBEL and H ATTIA, 2015. High performance cutting of advanced aerospace alloys and composite materials Annals of CIRP. 2, (In Press.)
DONG, X., RAFFLES, M., COBOS-GUZMAN, S., AXINTE, D. and KELL, J., 2015. A novel continuum robot using twin-Pivot compliant joints: Design, modeling, and validation: Journal of Mechanisms and Robotics Journal of Mechanisms and Robotics. 8(2), TURNER S.L., RABANI A., AXINTE D.A., KING C.W., 2014. Dynamic ultrasonic contact detection using acoustic emissions Ultrasonics. 54(3), 749–753 LOWTH S., AXINTE D.A., 2014. An assessment of "variation conscious" precision fixturing methodologies for the control of circularity within large multi-segment annular assemblies PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY. 38(2), 379-390 DONG, X, RAFFLES, M, GUZMAN, SC, AXINTE, D, KELL, J, 2014. Design and analysis of a family of snake arm robots connected by compliant joints MECHANISM AND MACHINE THEORY. 77, 73-91 D. SRINIVASU and D. A. AXINTE, 2014. Mask-less pocket milling of composites by abrasive waterjets – An experimental investigaton ASME - Journal of Manufacturing Science and Engineering. 136/4,, 1144-1157
P. BUTLER-SMITH, D. A. AXINTE, M.DAINE and C.KONG, 2014. Mechanisms of surface response to overlapped abrasive grits of controlled shapes and positions: An analysis of ductile and brittle materials Annals of CIRP. 63, in press (In Press.)
R. M’SAOUBI, D. A. AXINTE, C. HERBERT, M. HARDY and P. SALMON, 2014. Surface integrity of nickel-based alloys subjected to severe plastic deformation by abusive drilling Annals of CIRP. in press (In Press.)
C. HERBERT, D. A. AXINTE, M. HARDY and P. WITHERS, 2014. Influence of surface anomalies following hole making operations on the fatigue performance for a Nickel-based superalloy ASME - Journal of Manufacturing Science and Engineering. in press (In Press.)
AXINTE, D.A, KARPUSCHEWSKI, B, KONG, M.C, BEAUCAMP, A.T, ANWAR, S, MILLER, D, PETZEL, M, 2014. High Energy Fluid Jet Machining (HEFJet-Mach): From scientific and technological advances to niche industrial applications CIRP Annals - Manufacturing Technology. SRINIVASU, D.S. , AXINTE, D.A., 2014. Mask-less pocket milling of composites by abrasive waterjets: An experimental investigation Journal of Manufacturing Science and Engineering, Transactions of the ASME. 136(4), 041005 HARDY, M.C, HERBERT, C.R.J, KWONG, J, LI, W, AXINTE, D.A, SHARMAN, A.R.C, ENCINAS-OROPESA, A, WITHERS, P.J, 2014. Characterising the integrity of machined surfaces in a powder nickel alloy used in aircraft engines In: 2nd CIRP Conference on Surface Integrity,. 13. 411-416 KOLLURU, KV ; AXINTE, DA ; RAFFLES, MH ; BECKER, AA, 2014. Vibration suppression and coupled interaction study in milling of thin wall casings in the presence of tuned mass dampers PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE. 228(6), 826-836 D. PALMER, S. COBOS GUZMAN and D. AXINTE, 2014. Real-time method for tip following navigation of continuum snake arm robots Robotics and Autonomous Systems. 62, 1478-1485 M'SAOUBI, R ; AXINTE, D ; HERBERT, C ; HARDY, M ; SALMON, P, 2014. Surface integrity of nickel-based alloys subjected to severe plastic deformation by abusive drilling CIRP ANNALS-MANUFACTURING TECHNOLOGY. 63(1), 61-64 BUTLER-SMITH PW, AXINTE DA, DAINE M, KENNEDY AR, HARPER LT, BUCOURT JF, RAGUENEAU R, 2014. A study of an improved cutting mechanism of composite materials using novel design of diamond micro core drills International Journal of Machine Tools and Manufacture. GILBERT, D., STOESSLEIN, M., AXINTE, D., BUTLER-SMITH, P. and KELL, J., 2014. A time based method for predicting the workpiece surface micro-topography under pulsed laser ablation: Journal of Materials Processing Technology Journal of Materials Processing Technology. 214(12), 3077-3088 BUTLER-SMITH P.W. and AXINTE D., 2013. Micro/nanometric investigations of the effects of laser ablation in the generation of micro-tools from solid CVD diamond structures Journal of Materials Processing Technology. 2, 194-200.
ANWAR, S., AXINTE, D.A. and BECKER, A.A., 2013. Finite element modelling of abrasive waterjet milled footprints Journal of Materials Processing Technology. 213(2), 180-193 RAFFLES M.H., KOLLORU K. and AXINTE D., 2013. Assessment of adhesive fixture system under static and dynamic loading conditions, Journal of Engineering Manufacture Journal of Engineering Manufacture. 227(2), 267-280
KOLLURU K., AXINTE D. and BECKER A., 2013. A solution for minimising vibrations in milling of thin walled casings using workpiece surface damping Annals of CIRP. 1(62), 415-418
KONG M.C., SRINIVASU S., AXINTE D., VOICE W., MCGOURLAY J. and HON B., 2013. On geometrical accuracy and integrity of surfaces in multi-mode abrasive waterjet machining of NiTi shape memory alloys Annals of CIRP. 1(62), 555-558
URIARTE L., ZATARAIN M., AXINTE D., YAGÜE-‐FABRA J., ILHENFELDT S. and EGUIA J., 2013. Machine tools for large parts Annals of CIRP. 2, (In Press.)
K. KOLLURU and D. A. AXINTE, 2013. Coupled interaction of dynamic responses of tool and workpiece in thin wall milling Journal of Materials Processing Technology. 213(9), 1565-1574
K. KOLLURU, D. A. AXINTE and M. RAFFLES, 2013. Vibration suppression and coupled interaction study in milling of thin wall casings in presence of tuned mass dampers Proc. of IMechE - Part B, Journal of Engineering Manufacture. in press (In Press.)
D. A. AXINTE, P. BUTLER-SMITH, C. AKGUN and K. KOLLURU, 2013. On the influence of single grit micro-geometry on grinding behavior of ductile and brittle materials International Journal of Machine Tools and Manufacture. 74, 12-18
ALLEN J., AXINTE D and PRINGLE T, 2012. Theoretical analysis of a special purpose miniature machine tool with parallel kinematics architecture: Free leg hexapod Proceedings of the Institution of Mechanical Engineers. Part B, Journal of Engineering Manufacture. 226(3), 412-430
KONG, M.C., ANWAR, S., BILLINGHAM, J. and AXINTE, D.A., 2012. Mathematical modelling of abrasive waterjet footprints for arbitrarily moving jets: part I—single straight paths International Journal of Machine Tools and Manufacture. 53(1), 58-68 C. KONG, D. AXINTE, B. WILSON, I. MARINESCU, M. RAFFLES and J. ALLEN, 2012. An innovative design of a multi-task dynamometer for turning operations Proc. of IMechE - Part B, Journal of Engineering Manufacture. 226(5),
C. HERBERT, J. KWONG, C. KONG, D. AXINTE, M. HARDY and P. WITHERS, 2012. An evaluation of the evolution of workpiece surface integrity in hole making operations for a nickel-based superalloy Journal of Materials Processing Technology. 212(8), 1723–1730
BUTLER-SMITH, P.W., AXINTE, D.A. and DAINE, M., 2012. Solid diamond micro-grinding tools: from innovative design and fabrication to preliminary performance evaluation in Ti-6Al-4V International Journal of Machine Tools and Manufacture. 59(August), 55-64 KONG, M.C., MIRON, C.B., AXINTE, D.A., DAVIES, S. and KELL, J., 2012. On the relationship between the dynamics of the power density and workpiece surface texture in pulsed laser ablation CIRP Annals: Manufacturing Technology. 61(1), 203-206 RABANI R. and MARINESCU I., 2012. Acoustic emission energy transfer rate: a method for monitoring abrasive waterjet milling International Journal of Machine Tools and Manufacture. 61, 80-89
SRINIVASU, D. and AXINTE, D., 2011. An analytical model for top width of jet footprint in abrasive waterjet milling: a case study on SiC ceramics Journal of Engineering Manufacture. 225(3), 319-335
MARINESCU, I, AXINTE, D., WITHERS, P., HERBERT, C. and MCGOURLAY, J., 2011. An assessment of thread cutting strategies to enable damage-tolerant surfaces on an advanced Ni-based aerospace superalloy Journal of Engineering Manufacture. 225(1), 12-24
BUTLER-SMITH P.W., AXINTE D. and DAINE M., 2011. Ordered diamond micro-arrays for ultra-precision grinding - an evaluation in Ti-6Al-4V International Journal of Machine Tools and Manufacture. 51(1), 54-66 AXINTE, D.A., ALLEN, J.M., ANDERSON, R., DANE, I., URIARTE, L. and OLARA, A., 2011. Free-leg Hexapod: a novel approach of using parallel kinematic platforms for developing miniature machine tools for special purpose operations CIRP Annals - Manufacturing Technology. 60(1), 395-398 ANWAR A., AXINTE D. and BECKER A., 2011. Finite element modelling of a single particle impact during abrasive waterjet milling Proc. IMechE - Part J, Journal of Engineering Tribology. 225, 821-832 MARINESCU, I. and AXINTE, D., 2011. An automated monitoring solution for avoiding surface anomalies in milling of aerospace alloys International Journal of Machine Tools and Manufacture. 51(4), 349-357 KONG, M.C., AXINTE, D. and VOICE, W., 2010. Aspects of material removal mechanism in plain waterjet milling on gamma titanium aluminide Journal of Materials Processing Technology. 210(3), 573-584 AXINTE, D., ABDUL SHUKOR, S. and BOZDANA A.T., 2010. An analysis of the functional capability of an in-house developed miniature 4-axis machine tool International Journal of Machine Tools and Manufacture. 50(2), 191-203 SRINIVASU, D. and AXINTE, D., 2010. Investigations on Jet Footprint Geometry and its Characteristics for Complex Shape Machining With Abrasive Waterjets. In: , ed., Silicon Carbide Ceramic Material, Properties and Applications of Silicon Carbide
AXINTE, D.A and DEWES, R.C, 2010. High speed milling of AISI H13 hot work tool steel using polycrystalline cubic boron nitride ball nose mills: from experimental investigations and empirical modelling to functional testing of the machined surfaces Proceedings of IMechE - Part B, Journal of Engineering Manufacture. 224(1), 15-24
AXINTE, D. A., SRINIVASU, D. S., BILLINGHAM, J. and COOPER, M, 2010. Geometrical modelling of abrasive waterjet footprints: a study for 90º jet impact angle, Annals of CIRP. 59(1), 341-346 AXINTE D.A, STEPANIAN J.P, KONG M.C and MCGOURLAY J., 2009. Abrasive waterjet turning—An efficient method to profile and dress grinding wheels International Journal of Machine Tools and Manufacture. 49(3-4), 351-356 AXINTE, D., KWONG, J. and KONG M.C., 2009. Workpiece surface integrity of Ti-6-4 heat-resistant alloy when employing different polishing methods Journal of Materials Processing Technology. 209(4), 1843-1852 AXINTE D.A., SRINIVASU D.S., KONG M.C. and BUTLER-SMITH P.W., 2009. Abrasive waterjet cutting of polycrystalline diamond: A preliminary investigation International Journal of Machine Tools & Manufacture. 49(10), 797-803 KONG, M.C. AND AXINTE, D.A., 2009. Response of Titanium Aluminide Alloy to Abrasive Waterjet Cutting: Geometrical Accuracy and Surface Integrity Issues vs. Process Parameters Proceedings of the IMECHE Part B: Journal of Engineering Manufacture. 223(1), 19-42
BOUD, F., BAYARD, O., CHATTI, S., AXINTE, D., NICOLESCU, M. and AGIRRE, J., 2009. A new approach in standardising a European curriculum in production engineering European Journal of Engineering Education,. 34(6), 487-496.
LI W, WITHERS P.J, AXINTE D, PREUSS M and ANDREWS P., 2009. Residual Stresses in Face Finish Turning of High Strength Nickel-Based Superalloy Journal of Materials Processing Technology. 209(10), 4896-4902 SHUKOR, SA and AXINTE D.A., 2009. An approach of using primitive feature analysis in manufacturability analysis systems for micro-milling/drilling International Journal of Computer Integrated Manufacturing. 22(8), 727 – 744
SHUKOR S. A. and AXINTE D. A., 2009. Manufacturability analysis system: issues and future trends International Journal of Production Research. 47(5), 1369 – 1390 KWONG J, AXINTE D. A, WITHERS P.J and HARDY M. C., 2009. Minor cutting edge – workpiece interactions in drilling of an advanced Nickel based superalloy International Journal of Machine Tools & Manufacture. 49(7-8), 645-658 AXINTE D.A. and CAO Y.Y., 2008. Innovative design of a hybrid tool for turning assisted with superficial cold forming Journal of Materials Processing Technology. 1-3/204, 357-364 SHI, D., AXINTE, D. and GINDY, N.N., 2007. Development of an online machining process monitoring system : a case study of the broaching process International Journal of Advanced Manufacturing Technology. 34(1-2), 34-46 AXINTE, D.A. and ANDREWS, P., 2007. Some considerations on tool wear and workpiece surface quality of holes finished by reaming or milling in a nickel base superalloy Proceedings of the Institution of Mechanical Engineers. Part B, Journal of Engineering Manufacture. 221(4), 591-603 AXINTE D.A., 2007. An inverse method of teaching specialised manufacturing subjects: decomposing a focal representative product to sustain analysis and interaction of details European Journal of Engineering Education. 33(1), 1-18 (In Press.)
AXINTE, D.A., 2007. An experimental analysis of damped coupled vibrations in broaching International Journal of Machine Tools & Manufacture. 47(14), 2182-2188 AXINTE, D.A., ANDREWS, P., LI, W., GINDY, N., WITHERS, P.J. and CHILDS,T.H.C., 2006. Turning of advanced Ni based alloys obtained via powder metallurgy route CIRP Annals. 55(1), 117-120 LI, W, PREUSS, M, WITHERS, PJ, AXINTE, D and ANDREWS, P, 2006. Characterisation of residual stresses in machined surfaces of a high strength nickel-base superalloy Materials Science Forum. 525, 587-594 (In Press.)
AXINTE, D., BOUD, F., PENNY, J., GINDY, N. and WILLIAMS, D.J., 2005. Broaching of Ti-6-4 - detection of workpiece surface anomalies on dovetail slots through process monitoring CIRP Annals. 54(1), 87-90 AXINTE, D.A., KRITMANOROT, M., AXINTE, M. and GINDY, N.N.Z., 2005. Investigations on belt polishing of heat-resistant titanium alloys Journal of Materials Processing Technology. 166(3), 398-404 AXINTE, D.A., GINDY, N., FOX, K. and UNANUE, I., 2004. Process monitoring to assist the workpiece surface quality in machining International Journal of Machine Tools & Manufacture. 44(10), 1091-1108 AXINTE, D.A. and GINDY, N., 2004. Turning assisted with deep cold rolling - a cost efficient hybrid process for workpiece surface quality enhancement Proceedings of the Institution of Mechanical Engineers. Part B, Journal of Engineering Manufacture. 218(7), 807-811 AXINTE, D.A. and GINDY, N., 2003. Tool condition monitoring in broaching Wear. 254(3-4), 370-382 AXINTE, D., AXINTE, M. and TANNOCK, J.D.T., 2003. A multicriteria model for cutting fluid evaluation Proceedings of the Institution of Mechanical Engineers. Part B, Journal of Engineering Manufacture. 217(10), 1341-1353 AXINTE, D.A. and GINDY, N., 2002. Optimization strategy for turning operation accounting for cutting tool wear history Proceedings of the Institution of Mechanical Engineers. Part B, Journal of Engineering Manufacture. 216(10), 1407-1411 AXINTE, D.A., BELLUCO, W. and DE CHIFFRE, L., 2001. Evaluation of cutting force uncertainty components in turning International Journal of Machine Tools & Manufacture. 41(5), 719-730 AXINTE, D.A., BELLUCO, W. and DE CHIFFRE, L., 2001. Reliable tool life measurements in turning - an application to cutting fluid efficiency evaluation International Journal of Machine Tools & Manufacture. 41(7), 1003-1014 AXINTE, D. A. and DEWES, R. C., 2001. Tool wear and workpiece surface integrity when high speed ball nose end milling hardened AISI H13 Metal Cutting and High Speed Machining. 3RD, 171-180
AXINTE, D, MUNTEANU, V and EPUREANU, A., Structural change of the roll body superficial layer as a result of grinding process Tecnica Italiana. 2, 117-121
AXINTE, D, MUNTEANU, V and EPUREANU, A., Optimisation of the properties of surface layer formed during the roll grinding operation Revue de Metallurgie. 199, 915-923
ALI, A., SMARTT, C., IM, J., WILLIAMS, O., LESTER, E. and GREEDY, S., Impact of dielectric substrates on chipless RFID tag performance: INTERNATIONAL JOURNAL OF MICROWAVE AND WIRELESS TECHNOLOGIES INTERNATIONAL JOURNAL OF MICROWAVE AND WIRELESS TECHNOLOGIES. SRIRATANASAK, N., AXINTE, D., DONG, X., MOHAMMAD, A., RUSSO, M. and RAIMONDI, L., Tasering Twin Soft Robot: A Multimodal Soft Robot Capable of Passive Flight and Wall Climbing: Advanced Intelligent Systems Advanced Intelligent Systems.