BRECHER, CHRISTIAN, NEUS, STEPHAN, GÄRTNER, MARCUS, ECKEL, HANS-MARTIN, HOPPERT, MAIK, JAMES, BARRY, GERADA, CHRIS, DEGANO, MICHELE, ILKHANI, MOHAMMAD REZA and DI NARDO, MAURO, 2023. Design of an aircraft generator with radial force control [version 3; peer review: 2 approved] Open Research Europe. RILEY, PAUL, DEGANO, MICHELE and GERADA, CHRIS, 2023. Radical technology innovations for high‐speed transport; ePlanes to replace rail? IET Electrical Systems in Transportation. 13, GALLARDO, CÉSAR, MADARIAGA-CIFUENTES, CARLOS, TAPIA, JUAN and DEGANO, MICHELE, 2023. A Method to Determine the Torque Ripple Harmonic Reduction in Skewed Synchronous Reluctance Machines Applied Sciences. 13, 2949 MADARIAGA, CARLOS, GALLARDO, CESAR, TAPIA, JUAN A., JARA, WERNER, ESCOBAR, ANDRES and DEGANO, MICHELE, 2023. Fast Assessment of Rotor Barrier Dimensional Allowances in Synchronous Reluctance Machines IEEE Access. 11, 58349-58358 WU, JULAN, ABOULKHAIR, NESMA, ROBERTSON, STUART, ZHOU, ZHAOXIA, BAGOT, PAUL, MOODY, MICHAEL, DEGANO, MICHELE, ASHCROFT, IAN and HAGUE, RICHARD, 2023. Amorphous-crystalline Nanostructured Nd-Fe-B Permanent Magnets using Laser Powder Bed Fusion: Metallurgy and Magnetic Properties Acta Materialia. 259, 119239 GALLICCHIO, GIANVITO, PALMIERI, MARCO, CUPERTINO, FRANCESCO, DI NARDO, MAURO, DEGANO, MICHELE and GERADA, CHRIS, 2022. Permanent Magnets Assistance Design Methods of High-Speed Synchronous Reluctance Machines In: 2022 IEEE Energy Conversion Congress and Exposition (ECCE). 1-8 KORMAN, OĞUZ, DI NARDO, MAURO, DEGANO, MICHELE, GERADA, CHRIS, GALLICCHIO, GIANVITO and CUPERTINO, FRANCESCO, 2022. On the Pole Pair Selection of Synchronous Reluctance Machines for Traction Applications In: 2022 International Conference on Electrical Machines (ICEM). 2114-2120 GALLICCHIO, GIANVITO, PALMIERI, MARCO, CUPERTINO, FRANCESCO, DI NARDO, MAURO, DEGANO, MICHELE and GERADA, CHRIS, 2022. Design Methodologies of High Speed Synchronous Reluctance Machines In: 2022 International Conference on Electrical Machines (ICEM). 448-454 TAMEEMI, AHMED, DEGANO, MICHELE, DI NARDO, MAURO, MURATALIYEV, MUKHAMMED, GERADA, DAVID, XU, ZEYUAN and GERADA, CHRIS, 2022. Power Loss and Performance Analysis of a Permanent Magnet Synchronous Motor for Actuator Applications In: 2022 International Conference on Electrical Machines (ICEM). 807-813 PETRELLI, G., CUI, M., ZOU, T., SALA, G., LA ROCCA, A., BARATER, D., FRANCESCHINI, G., GERADA, D., DEGANO, M. and GERADA, C., 2022. Comparison of Aluminium and Copper Conductors in Hairpin Winding Design for High Power Density Traction Motors In: 2022 International Conference on Electrical Machines (ICEM). 1635-1641 GOLOVANOV, D., GERADA, D., SALA, G., DEGANO, M., TRENTIN, A., CONNOR, P. H., XU, Z., LA ROCCA, A., GALASSINI, A., TARISCIOTTI, L., EASTWICK, C. N., PICKERING, S. J., WHEELER, P., CLARE, J. C., FILIPENKO, M. and GERADA, C., 2021. 4MW Class High Power Density Generator for Future Hybrid-Electric Aircraft: IEEE Transactions on Transportation Electrification IEEE Transactions on Transportation Electrification. TRENTIN, A., SALA, G., TARISCIOTTI, L., GALASSINI, A., DEGANO, M., CONNOR, P. H., GOLOVANOV, D., GERADA, D., XU, Z. Y., LA ROCCA, A., EASTWICK, C. N., PICKERING, S. J., WHEELER, P., CLARE, J. C. and GERADA, C., 2021. Research and Realization of High-Power Medium-Voltage Active Rectifier Concepts for Future Hybrid-Electric Aircraft Generation: Ieee Transactions on Industrial Electronics Ieee Transactions on Industrial Electronics. 68(12), 11684-11695 GOLOVANOV, D., GERADA, D., SALA, G., DEGANO, M., TRENTIN, A., CONNOR, P. H., XU, Z. Y., LA ROCCA, A., GALASSINI, A., TARISCIOTTI, L., EASTWICK, C. N., PICKERING, S. J., WHEELER, P., CLARE, J., FILIPENKO, M. and GERADA, C., 2021. 4-MW Class High-Power-Density Generator for Future Hybrid-Electric Aircraft: Ieee Transactions on Transportation Electrification Ieee Transactions on Transportation Electrification. 7(4), 2952-2964 BU, FEIFEI, XUAN, FUQIANG, YANG, ZHIDA, GAO, YU, PAN, ZIHAO, DEGANO, MICHELE and GERADA, CHRIS, 2021. Rotor Position Tracking Control for Low Speed Operation of Direct-Drive PMSM Servo System IEEE-ASME TRANSACTIONS ON MECHATRONICS. 26(2), 1129-1139 DI NARDO, MAURO, MARFOLI, ALESSANDRO, DEGANO, MICHELE, GERADA, CHRIS and CHEN, WENLIANG, 2021. Rotor Design Optimization of Squirrel Cage Induction Motor-Part II: Results Discussion IEEE TRANSACTIONS ON ENERGY CONVERSION. 36(2), 1280-1288 MARFOLI, ALESSANDRO, DI NARDO, MAURO, DEGANO, MICHELE, GERADA, CHRIS and CHEN, WENLIANG, 2021. Rotor Design Optimization of Squirrel Cage Induction Motor-Part I: Problem Statement IEEE TRANSACTIONS ON ENERGY CONVERSION. 36(2), 1271-1279 AN, YUANSHENG, MA, CONGGAN, ZHANG, NIC, GUO, YUE, DEGANO, MICHELE, GERADA, CHRIS, LI, QIONGYAO and ZHOU, SHENGSEN, 2021. Open-Circuit Air-Gap Magnetic Field Calculation of Interior Permanent Magnet Synchronous Motor With V-Shaped Segmented Skewed Poles Using Hybrid Analytical Method IEEE TRANSACTIONS ON MAGNETICS. 57(12), AN, YUANSHENG, MA, CONGGAN, ZHANG, NIC, GUO, YUE, DEGANO, M., GERADA, C., BU, FEIFEI, YIN, XIANGRUI, LI, QIONGYAO and ZHOU, SHENGSEN, 2021. Calculation Model of Armature Reaction Magnetic Field of Interior Permanent Magnet Synchronous Motor with Segmented Skewed Poles IEEE Transactions on Energy Conversion. MURATALIYEV, MUKHAMMED, DEGANO, MICHELE and GALEA, MICHAEL, 2021. A Novel Sizing Approach for Synchronous Reluctance Machines IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS. 68(3), 2083-2095 MARFOLI, ALESSANDRO, NARDO, MAURO DI, GARVEY, SEAMUS, DEGANO, MICHELE, VASHISHT, RAJIV, TURNBULL, ROBERT and GERADA, CHRIS, 2021. Modelling, Analysis and Design Considerations of Multi-Phase Bearingless Permanent Magnet Synchronous Machine In: 2021 IEEE Energy Conversion Congress and Exposition (ECCE). 4646-4653 GALLICCHIO, GIANVITO, PALMIERI, MARCO, CUPERTINO, FRANCESCO, DI NARDO, MAURO, DEGANO, MICHELE and GERADA, CHRIS, 2021. Influence of the Magnetic Load on High Speed Synchronous Reluctance Machines Design In: IECON 2021 – 47th Annual Conference of the IEEE Industrial Electronics Society. 1-6 PRECI, ERALDO, NUZZO, STEFANO, BARATER, DAVIDE, GERADA, DAVID, DEGANO, MICHELE, BUTICCHI, GIAMPAOLO and GERADA, CHRISTOPHER, 2021. Modelling of Voltage Distribution within Hairpin Windings In: IECON 2021 – 47th Annual Conference of the IEEE Industrial Electronics Society. 1-6 PRECI, ERALDO, GERADA, DAVID, DEGANO, MICHELE, BUTICCHI, GIAMPAOLO, GERADA, CHRISTOPHER, NUZZO, STEFANO and BARATER, DAVIDE, 2021. Hairpin Windings: Sensitivity Analysis and Guidelines to Reduce AC Losses In: 2021 IEEE Workshop on Electrical Machines Design, Control and Diagnosis (WEMDCD). 82-87 AL-ANI, MAHIR, AL-TIMIMY, AHMED, GIANGRANDE, PAOLO, DEGANO, MICHELE, LINDH, PIA, ZHANG, HE, GALEA, MICHAEL and GERADA, CHRIS, 2021. Influence of Manufacturing and Drive Effects in High-Speed, High-Power-Density PM Machine for Flooded Pump Application In: 2021 IEEE Workshop on Electrical Machines Design, Control and Diagnosis (WEMDCD). 88-94 BU, FEIFEI, LIU, HAOZHE, HUANG, WENXIN, HU, YUWEN, DEGANO, MICHELE, GERADA, CHRIS and RAJASHEKARA, KAUSHIK, 2020. Induction-Machine-Based Starter/Generator Systems: Techniques, Developments, and Advances IEEE INDUSTRIAL ELECTRONICS MAGAZINE. 14(1), 4-19 YUAN, X., ZHANG, S., ZHANG, C., GALASSINI, A., BUTICCHI, G. and DEGANO, MICHELE, 2020. Improved Model Predictive Current Control for SPMSM Drives Using Current Update Mechanism IEEE Transactions on Industrial Electronics. BU, F., PU, T., LIU, Q., MA, B., DEGANO, MICHELE and GERADA, C., 2020. Four-Degree-of-Freedom Overmodulation Strategy for Five-Phase Space Vector Pulse Width Modulation IEEE Journal of Emerging and Selected Topics in Power Electronics. MA, C., ZHOU, S., YANG, M., DEGANO, MICHELE, GERADA, C., FANG, J. and LIU, Q., 2020. Characteristic Analysis and Direct Measurement for Ultra-thin Air Gap Magnetic Field of External Rotor Permanent Magnet Synchronous Motors in Electric Vehicles IET Electric Power Applications. PETRIC. I., VUKOSAVIC, S., DEGANO, MICHELE and GALASSINI, A., 2020. A Digital Internal Model Current Controller for Salient Machines IEEE Transactions on Industrial Electronics. MURATALIYEV, M., DEGANO, MICHELE, DI NARDO, M., PRYSTUPA, D., SHUO, W., BUTICCHI, G., ZHANG, H., GERADA, C. and GALEA, M., 2020. A Homothetic Scaling Criteria for Synchronous Reluctance Machines Design IEEE TRANSACTION ON ENERGY CONVERSION. CONGGAN MA, YUJIAO GAO, MICHELE DEGANO, YANYAN WANG, JIANGUANG FANG, CHRISTOPHER GERADA, SHENGSEN ZHOU and YUANYE MU, 2020. Eccentric position diagnosis of static eccentricity fault of external rotor permanent magnet synchronous motor as an in-wheel motor IET Electric Power Applications. 14(11), 2263 – 2272 GIACOMO SALA, MICHELE MENGONI, GABRIELE RIZZOLI, MICHELE DEGANO, LUCA ZARRI and ANGELO TANI, 2020. Impact of Star Connection Layouts on the Control of Multiphase Induction Motor Drives Under Open-Phase Fault IEEE Transactions on Power Electronics. 36(4), 3717 - 3726 GIACOMO SALA, GIORGIO VALENTE, MAURO DI NARDO, MICHELE DEGANO, PERICLE ZANCHETTA and CHRIS GERADA, 2020. Power-Sharing Control in Bearingless Multi-Sector and Multi-Three-Phase Permanent Magnet Machines IEEE Transactions on Industrial Electronics. 1-1 LI, JIAQI, MAHMOUD, HANAFY, DEGANO, MICHELE, BARDALAI, ANUVAV, ZHANG, XIAOCHEN and GERADA, CHRIS, 2020. Impact on Vibration of Eccentric Permanent Magnet Assisted Synchronous Reluctance Machine In: 2020 International Conference on Electrical Machines (ICEM). 476-480 MAHMOUD, HANAFY, VALENTE, GIORGIO, DEGANO, MICHELE, NARDO, MAURO DI, GERADA, CHRIS and JAMES, BARRY, 2020. Multi-Sector Windings For Bearing Relief E-Machine: Saturation and Cross Coupling Effects In: 2020 International Conference on Electrical Machines (ICEM). 246-252 TRANSI, TOMMASO, MURATALIYEV, MUKHAMMED, DEGANO, MICHELE, PRECI, ERALDO, GERADA, DAVID and GERADA, CHRIS, 2020. Influence of Rotor Design on Electromagnetic Performance in Interior Permanent Magnet Machines In: IECON 2020 The 46th Annual Conference of the IEEE Industrial Electronics Society. 1021-1026 DE GAETANO, D., SALA, G., DEGANO, M., GERADA, D. and GERADA, C., 2020. ASYMMETRICAL STATOR GEOMETRY DESIGN FOR THREE-PHASE MACHINES WITH DISTRIBUTED WINDING In: The 10th International Conference on Power Electronics, Machines and Drives (PEMD 2020). 497-502 LIU, H., BU, F., HUANG, W., LIU, L., HU, Y., DEGANO, MICHELE and GERADA, C., 2019. Control Strategy for Five-Phase Dual-Stator Winding Induction Starter/Generator System IEEE Transactions on Industrial Electronics. 66, 1 BAO, Y., DEGANO, MICHELE, WANG, S., CHUAN, L., XU, Z., ZHANG, H. and GERADA, C., 2019. A Novel Concept of Ribless Synchronous
Reluctance Motor for Enhanced Torque
Capability IEEE Transactions on Industrial Electronics. WANG, S., KANG, J., DEGANO, MICHELE, GALASSINI, A. and GERADA, C., 2019. An Accurate Wide-speed Range Control Method of IPMSM Considering Resistive Voltage Drop and Magnetic Saturation IEEE Transactions on Industrial Electronics. GIANGRANDE, P., GALASSINI, A., PAPADOPOULOS. S., AL-TIMIMY, A., LO CALZO, G., DEGANO, MICHELE, GALEA, M. and GERADA, C., 2019. Considerations on the Development of an Electric Drive for a Secondary Flight Control Electromechanical Actuator IEEE Transactions on Industry Applications. RAHMAN, A.A., GALASSINI, A., DEGANO, MICHELE, ABBAS, H. and BOZHKO, S., 2019. Post-fault compensation control strategy for multi-three-phase PMSM under open-circuit and short-circuit condition In: WEMDCD - 2019 IEEE Workshop on Electrical Machines Design, Control and Diagnosis. VALENTE, G., GERADA, D., DEGANO, MICHELE, GERADA, C., FOULSHAM, J. and BEEBY, D., 2019. Optimized sizing of IPM machines for automotive traction application In: IEMDC 2019 - International Electric Machines & Drives Conference. PAPADOPOULOS. S., GALASSINI, A., RUKSNAITIS, L., FARHAT, N., KISELYCHNYKA, O., MIDGELY, W. and DEGANO, MICHELE, 2019. SMART:
Modular Architecture for Reliable Transportation In: IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society.
ISMAGLIOV, F., GERADA, C., DEGANO, MICHELE, GUREVICH, O., GULIYENKO, A., VAVILOV, V. and GUSAKOV, D., 2019. Fault-Tolerant Electrical Machines for Transport Applications In: 2019 International Conference on Electrotechnical Complexes and Systems (ICOECS). YUAN, X., ZHANG, S., ZHANG, C., DEGANO, MICHELE, BUTICCHI, G. and GALASSINI, A., 2019. Improved Finite-State Model Predictive Current Control with Zero-Sequence Current Suppression for OEW-SPMSM Drives IEEE Transactions on Power Electronics. 35(5), 4996 - 5006 MAHMOUD, H., BACCO, G., DEGANO, MICHELE, BIANCHI, N. and GERADA, C., 2018. Synchronous Reluctance Motor Iron losses: Considering Machine Non-Linearity at MTPA, FW, and MTPV Operating Conditions IEEE Transactions on Energy Conversion. AL-TIMIMY, A., ALANI, M., DEGANO, MICHELE, GIANGRANDE, P., GALEA, M. and GERADA, C., 2018. Influence of Rotor Endcaps on the Electromagnetic Performance of High Speed PM Machine IET Electric Power Applications. AL-TIMIMY, A., GIANGRANDE, P., DEGANO, MICHELE, XU, Z., GALEA, M., GERADA, C., LO CALZO, G., ZHANG, H. and XIA, L., 2018. Design and Losses Analysis of a High Power Density Machine for Flooded Pump Applications IEEE Transactions on Industry Applications. GALASSINI, A., COSTABEBER, A., DEGANO, MICHELE, GERADA, C., BUTICCHI, G. and BARATER, D., 2018. Response to Discussion of “A modular speed-drooped system for high reliability integrated modular motor drives IEEE Transactions on Industry Applications. GALASSINI, A., COSTABEBER, A., DEGANO, MICHELE, GERADA, C., TESSAROLO, A. and MENIS, R., 2018. Enhanced Power Sharing Transient with Droop Controllers for Multi-Three-Phase Synchronous Electrical Machines IEEE Transactions on Industrial Electronics. MAHMOUD, HANAFY, BIANCHI, NICOLA, DEGANO, MICHELE, AL-ANI, MAHIR and GERADA, CHRIS, 2018. Eccentric Reluctance and Permanent Magnet Synchronous Machines Comparison IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS. 54(6), 5760-5771 MAHMOUD, H., DEGANO, MICHELE, BACCO, G., BIANCHI, N. and GERADA, C., 2018. Synchronous Reluctance Motor Iron Losses: Analytical Model and Optimization In: ECCE 2018.
AL-TIMIMY, A., GIANGRANDE, P., DEGANO, MICHELE, GALEA, M. and GERADA, C., 2018. Investigation of AC Copper and Iron Losses in High-Speed High-Power Density PMSM In: ICEM 2018 - International Conference on Electrical Machines.
GIANGRANDE, P., AL-TIMIMY, A., GALASSINI, A., PAPADOPOULOS. S., DEGANO, MICHELE and GALEA, M., 2018. Design of PMSM for EMA Employed in Secondary Flight Control Systems In: ESARS 2018 - Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles.
GOLOVANOV, DMITRY, GERADA, DAVID, VAKIL, GAURANG, XU, ZEYUAN, DEGANO, MICHELE and GERADA, CHRIS, 2018. The Influence of Stator Material on the Power Density and Iron Loss of a High-Performace Starter-Generator for More Electric Aircraft 2018 21ST INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES AND SYSTEMS (ICEMS). 169-173
NUZZO, S., DEGANO, MICHELE, GALEA, M., GERADA, C., GERADA, D. and BROWN, N., 2017. Improved Damper Cage Design for Salient-Pole Synchronous Generators IEEE Transactions on Industrial Electronics. 64(3), 1958-1970 WANG, Y., VAKIL, G., NUZZO, S., DEGANO, M., GALEA, M., GERADA, C., ZHANG, H. and BROWN, N., 2017. Sensitivity analysis for performance and power density improvements in salient-pole synchronous generators HIND, D., TRENTIN, A., DEGANO, MICHELE, LOPEZ, S.A., GERADA, C., GALEA, M. and PACIURA, K., 2017. A hybrid sensorless control solution for an automotive drive application In: IEEE International Electric Machines and Drives Conference, IEMDC 2017. XU, Z., AL-TIMIMY, A., DEGANO, MARCO, GIANGRANDE, P., LO CALZO, G., ZHANG, H., GALEA, M., GERADA, C., PICKERING, S. and XIA, L., 2016. Thermal management of a permanent magnet motor for an directly coupled pump In: International Conference on Electrical Machines (ICEM'2016). TAO YANG, TOM COX, MICHEL DEGANO and SERHIY BOZHKO, 2016. History and Recent Advancements of Electric Propulsion and Integrated Electrical Power Systems for Commercial & Naval Vessels In: NAVALEXPO.
CONCARI, C., TOSCANI, A., BARATER, D., CONCARI, L., DEGANO, MICHELE and PELLEGRINO, G., 2016. Comparison of flux observers for sensorless control of permanent magnet assisted SynRel motors In: 42nd Annual Conference of the IEEE Industrial Electronics Society, IECON 2016. NOTHOFER, A., TARISCIOTTI, L., GREEDY, S., EMPRINGHAM, L., DE LILLO, L. and DEGANO, M., 2016. CONDUCTED EMISSION EVALUATION FOR DIRECT MATRIX CONVERTERS PROCEEDINGS OF 2016 ESA WORKSHOP ON AEROSPACE EMC (AEROSPACE EMC).
DEGANO, MICHELE, CARRARO, ENRICO and BIANCHI, NICOLA, 2015. Selection Criteria and Robust Optimization of a Traction PM-Assisted Synchronous Reluctance Motor IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS. 51(6), 4383-4391 DI NARDO, M., DEGANO. M., GALEA, M., GERADA, C., PALMIERI, M., CUPERTINO. F., BIANCHINI, C. and GERADA, D., 2015. End barrier shape optimizations and sensitivity analysis of synchrnous reluctance machines In: 41st Annual Conference of the IEEE Industrial Electronics Society, IECON 2015. N. BIANCHI, M. DEGANO and E. FORNASIERO, 2015. Sensitivity Analysis of Torque Ripple Reduction of Synchronous Reluctance and Interior PM Motors IEEE Transactions on Industry Applications. 51, 1