B. M. CHEN,, Y. A. ABAKR,, J. H. GOH, P. H. RILEY, and D. B. HANN, 2012. Development and Assessment of a SCORE Demo2.1 Thermo-Acoustic Engine: Low-cost, electricity generating heat engines for rural areas In:
DAVID KHOO, YOUSIF A. ABAKR and NORMAH M. GHAZALI, 2012. Numerical Investigation on the heat transfer from the cooking stove to the thermoacoustic engine’s regenerator: Low-cost, electricity generating heat engines for rural areas In:
ST WEE, DB HANN, YA ABAKR and P RILEY, 2012. PIV Based Wave Decomposition Technique for Waveguide Acoustic Analysis: Low-cost, electricity generating heat engines for rural areas In:
S. T. WEE, D. B. HANN, Y. A. ABAKR and P. RILEY, 2011. PIV wave propagation investigation of non-linear losses through 90o Bends in a Thermoacoustic Engine’s Feedback Loop: International Meeting on Advances in Thermofluids (IMAT) In:
ABAKR, Y.A., AL-ATABI, M. and BAIMAN, C., 2011. The Influence of Wave Patterns And Frequency on Thermo-Acoustic Cooling Effect: Journal of Engineering Science and Technology Journal of Engineering Science and Technology. 6(3), 394-398
B. M. CHEN,, P. H. RILEY, and Y. A. ABAKR,, 2011. Construction and Assessment of a Propane driven, Electricity-Generating Cooking Score-Stove™: International congress on Green process Engineering In:
B. M. CHEN,, P. H. RILEY, and Y. A. ABAKR,, 2011. Design and Testing of a Wood Burning Electricity Generator by using Dual-Core Thermoacoustic Engine: 2011 World Congress on Engineering and Technology (CET) In:
B. M. CHEN,, P. H. RILEY,, Y. A. ABAKR,, K.PULLEN,, D.B.HANN, and C.M.JOHNSON., 2011. Design and Development of a Low-Cost, Electricity-Generating Cooking Score-Stove™: IET Renewable Power Generation IET Renewable Power Generation.
B. M. CHEN,, Y. A. ABAKR,, P. H. RILEY, and D.B.HANN, 2011. Development of Thermoacoustic Engine Operating by Waste Heat from Cooking Stove At: Melaka, Malaysia
BAIMAN CHEN,, YOUSIF ABDALLA ABAKR,, PAUL RILEY, and DAVID HANN, 2011. Investigation and Measurement of a Low-cost Loudspeaker as a Liner Alternation for Thermoacoustic Application: 2011 International Conference on Applied Mechanics, Materials and Manufacturing In:
BAIMAN CHEN,, YOUSIF ABDALLA ABAKR,, PAUL RILEY, and DAVID HANN, 2011. Investigation and Measurement of a Low-cost Loudspeaker as a Liner Alternation for Thermoacoustic Application: Applied Mechanics and Materials Applied Mechanics and Materials.
LEE V. C. –C, ABAKR Y. A and WOO K. –C, 2011. Impedance pumping system as flow amplification device: 2011 International Conference on Applied Mechanics, Materials and Manufacturing AMM In:
LEE V. C. –C, ABAKR Y. A and WOO K. –C, 2011. A multi-stage impedance pumping system: The International Conference on Chemical Engineering In:
LEE V. C. –C, ABAKR Y. A. and WOO K. –C., 2011. Experimental investigation of multi-stage impedance pumping system: 4th International Meeting of Advances in Thermofluids In:
LEE V. C. –C., ABAKR Y. A., WOO K. –C. and AL-ATABI M., 2011. Experimental investigation of open loop multi-stage impedance pumping system: Journal of Engineering Science and Technology Journal of Engineering Science and Technology. 6(5), 7
CHEN BAIMAN,, YOUSIF ABDALLA ABAKR, and DAVID HANN., 2011. The Influence of Waveforms and Frequency on Thermoacoustic Cooling Effect: Asian Journal of Mechanical Engineering (AJME) Part A: Fluid, Thermal and Energy System Asian Journal of Mechanical Engineering (AJME) Part A: Fluid, Thermal and Energy System.
CHEN BAIMAN,, YOUSIF ABDALLA ABAKR, and DAVID HANN., 2011. Investigation of an Atmospheric Pressure Thermoacoustic Cooling System by Varying Its Operating Frequency: Journal of Engineering Science and Technology Journal of Engineering Science and Technology.
KELVIN H.C.S., YOUSIF A.A. and ANDREW C, 2011. Unsteady Heat Transfer in an Annular Pipe Part II: Swirling laminar Fmow: IIUM Engineering Journal, Vol 12(No. 6),
Q.H. SHAH, M MUJAHID, M. AL-ATABI and ABAKR, Y.A., 2011. Load carrying capability of liquid filled cylindrical shell structures under axial compression: Journal of Engineering Science and Technology Journal of Engineering Science and Technology. 6(4), 506-519
LEE V. C. –C., ABAKR Y. A. and WOO K. –C., 2010. Numerical investigation of multi-stage impedance pumping system: 3rd InternationalConference on Science & Technology: Applications in Industry and Education In:
LEE V. C. –C., YEO Z.-J,, ABAKR Y.A. and WOO K. –C., 2010. Investigation of impedance pumping in large scale applications: International Conference on Mathematical Applications in Engineering In:
CHEN BAIMAN,, YOUSIF ABDALLA ABAKR, and DAVID HANN., 2010. Investigation of an Atmospheric Pressure Thermoacoustic Cooling System by Varying Its Operating Frequency: 3rd International Conference on Science & Technology: Applications in Industry & Education In:
CHEN BAIMAN,, YOUSIF ABDALLA ABAKR, and DAVID HANN., 2010. The Influence of Waveforms and Frequency on Thermoacoustic Cooling Effect: 3rd International Conference on Science & Technology: Applications in Industry & Education In:
HO J. –H, WOO K. –C., LEE V. C. –C. and ABAKR Y. A., 2010. Oscillations of a conductor in a magnetic field: IUTAM Symposium on Nonlinear Dynamics for Advanced Technologies and Engineering Design In:
K. HO, Y. A. ABAKR and A. CHAN, 2010. Unsteady heat transfer in an annular pipe. Part I: Problem description and axial flow cooling: ICMAE In:
K. HO, Y. A. ABAKR and A. CHAN, 2010. Unsteady heat transfer in an annular pipe. Part II: Swirling laminar flow: ICMAE In:
K. HO, Y. A. ABAKR and E. M. TITUS, 2010. Design and testing of an experimental setup for swirling flow visualization and heat transfer study in a concentric annuli: 3rd ICTIE In:
HO, K, ABAKR, Y.A and CHAN, A., 2009. Cooling Fluid Flow Pattern Effect on the Temperature of A Magnetocaloric Material In: RANM 2009. (In Press.)
SAEID, N. H and ABAKR, Y. A., 2009. Periodic Jet Impingement Cooling of an Isothermal Surface In: International conference of heat 6th International Conference on Computational Heat and Mass Transfer Guangzhou, CHINA 18 - 21 May 2009. (In Press.)
ROMADHON, R.A, MAHDZIR, M and ABAKR, Y.A., 2009. Optimization of cooling systems in data centre, a Computational Fluid Dynamics model and simulation, Innovative Technologies in Intelligent Systems and Industrial Applications In: CITISIA, Kuala Lumpur, July 2009. (In Press.)
ROMADHON, R.A, MAHDZIR, M and ABAKR, A.M., 2008. Optimization of the performance of cooling system in data center facilities In: MICRA 2008, International Islamic University Malaysia, Kuala Lumpur. (In Press.)
JAHN KASSIM, P, ALI, M, ABAKR, Y. A, HARON, Y. A and TAN, R.M.L., 2008. Sustainable Residential Low Density Urban Development Integrating Sustainable Consciousness with Commercial Viability In: The World Sustainable Building Conference Proceedings 21-25th September 2008, Melbourne, Australia. (In Press.)
MUSHTAK, A.A and ABAKR, Y.A., 2007. Laminar mixing in SMX static mixers Journal of Engineering Science and Technology (JESTEC). 2(1), 95-101
MIRGHANI, I.A, AHMAD, F.I, ABAKR, Y.A and NURUL AMIN, A.K.M., 2007. Effectiveness of cryogenic machining with modified tool holder Journal of Materials Processing Technology. 185(1-3), 91-96 QASIM, H.S and ABAKR, Y.A., 2007. A comparison of energy absorbing capabilities of paper and steel structures subjected to progressive failure under free falling objects Journal of Engineering Science and Technology (JESTEC). 2(2), 200- 210
MUHIDA, R, PUTERI JAHN KASSIM, S, ABU EUSUF, M, MAISARAH, A, IBRAHIM, M.S and ABAKR, Y. A., 2006. Optimal Design of Photovoltaic Home System in Malaysia In: World Renewable Energy Congress Florence Italy, 19-25th August 2006. (In Press.)
ABAKR, Y. A and LEE, Y. S., 2006. Solar Water Boiler with Tracking System In: Solar Cookers International conference, Granada 12-16 July 2006, Granada, Spain. (In Press.)
ABAKR, Y. A and ABASAEED, A. E., 2006. Experimental evaluation of a conical-screw briquetting machine for the briquetting of carbonized cotton stalks in Sudan Journal of Engineering Science and Technology (JESTEC). 1(2), 212- 220
JAHNKASSIM, P. S, MAISARAH, A and ABAKR, Y. A., 2006. Environmental Performance Analysis of a Semi-Detached House in Kuala Lumpur In: ISESEE 2006 – International Symposium & Exhibition on Sustainable Energy & Environment, Maya Hotel, Kuala Lumpur, 4-5 December 2006. (In Press.)
ABAKR, Y. A, ISMAIL, A. F, ISMAIL, M. N, HARON, H. A and KASSIM, P. S., 2005. Towards The Zero Energy House - A Comparison Of Bioclimatic Strategiesand Thermal Comfort Issues In Two Differing Climates In: The 2005 World Sustainable Building Conference, Tokyo, 27-29 September 2005 (SB05Tokyo). (In Press.)
ABAKR, Y. A, KASSIM, P. S. J, HARON, H. A and MUHAMMAD, M. H., 2005. Simulating an Eco-House in Malaysia – An Environmental performance Analysis of Bioclimatic features in a Tropical Climate In: National Seminar on Energy in Buildings NSEB2005 – Sustainable Symboisis, Holiday Villa, Subang Jaya 10-11 May 2005. (In Press.)
ALI, M, ABAKR, Y. A and IBRAHIM, N., 2005. Building Performance Assessment Of An Eco-House In Malaysia: A Comparative Analysis In: The 2005 World Sustainable Building Conference, Tokyo, 27-29 September 2005 (SB05Tokyo). (In Press.)
HARON, H. A, MUHAMMAD, M. H, KASSIM, P. S and ABAKR, Y. A., 2005. Integrating An Environmental Performance Analysis With A Virtual Walkthrough - A Malaysian Case Study In: The 2005 World Sustainable Building Conference, Tokyo, 27-29 September 2005 (SB05Tokyo). (In Press.)
ISMAIL, A. F, ABAKR, Y. A, IBRAHIM, M. N and ALI, M., 2005. Performance Analysis Of A 15kw Photovoltaic Grid-Connected System Under The Equatorial Conditions In: The 2005 World Sustainable Building Conference, Tokyo, 27-29 September 2005 (SB05Tokyo). (In Press.)
ABAKR, Y. A, ISMAIL, A. F and MAHMUD, J., 2005. A Novel Solar Still Using Trough Concentrator In: ISES Solar World Congress, 6-12 August 2005, Orlando, Florida USA. (In Press.)
ALI, M. T and ABAKR, Y. A., 2005. Competition Based Engineering Learning In: Regional conference on Engineering Education RCEE2005, Johor, Malaysia 12-13 December 2005. (In Press.)
AL–ATABI, M.T, CHIN, S.B, LUO, X.Y, JOHNSON, A.G, BIRD, N.C and ABAKR, Y.A., 2004. The Relationship Between Gallstones Formation and Bile Flow in Human Cystic Duct In: Kuala Lumpur International Conference on Biomedical Engineering, BioMed 2004. (In Press.)
ABAKR, Y. A, KASSIM, P. S. J, HARON, H. A and MUHAMMAD, M. H., 2004. Simulating an Eco-House in Malaysia- Integrating an Environmental Performance Analysis with a Virtual Walkthrough In: Passive Design Considerations in the Built Environment, 22-23rd Nov. 2004. KAED, IIUM, Malaysia. (In Press.)
ABAKR, Y. A, ISMAIL, A. F and AHMED, M. I., 2004. Parametric Study of a Vacuum Enhanced Solar Still In: ASME’s Solar 2004 Conference, A Solar Harvest: Growing Opportunities, 11-14 July 2004, Portland, Oregon, USA. (In Press.)
AL-ZUHAIR, S, ABAKR, Y. A and AHMED, M. I., 2004. The Effect of the Operating Conditions on the Apparent Viscosity of Crude Palm Oil During Oil Clarification IIUM Journal of Engineering. 5(1), 55-64
SAEDON, J, MAHMUD, J and ABAKR, Y. A., 2004. Influence of ICT in Manufacturing Environment: Issues and Challenges In: Malaysian Science and Technology Congress 2004 (MSTC 2004), 5-6 October 2004, Palace of Golden Horses, Selangor, Malaysia. (In Press.)
ABAKR, Y. A, AHMED, M. I and ISMAIL, A. F., 2004. Modified Tool Holder for Cryogenic Machining In: ICAMT 2004, Kuala Lumpur, 11-13 May 2004. (In Press.)
ISMAIL, A. F, AHMED, M. I and ABAKR, Y. A., 2003. Experimental and Numerical Analysis of Electronics Heat Sink IIUM Engineering Journal. (In Press.)
AHMED, M. I, ABAKR, Y. A, PERVEZ, T and ISMAIL, A. F., 2001. Design and Analysis of a Solar Still using Finite Element Method In: First International Conference on Mechatronics, ICOM'01. (In Press.)
JUBRAN, B. A, AHMED, M. I, ISMAIL, A. F and ABAKR, Y. A., 2000. Numerical modelling of a multi-stage Solar Still Journal of Energy Conversion and Management. 41(11), 1107-1121 ABAKR, Y. A, JUBRAN, B. A, ISMAIL, A. F and AHMED, M. I., 1999. Prediction of the Performance of a Compact-Evacuated Solar Still In: World Renewable Energy Congress 1999 Malaysia. (In Press.)