ZHU, H. and OU, H., 2024. Heat-assisted friction stir-incremental sheet forming of thermoplastics Journal of Materials Processing Technology. 328, 118396 QIN, Z, GATEA, S and OU, H., 2024. Friction and heat partition coefficients in incremental sheet forming process Journal of Manufacturing Processes. 124, 503-523 ZHU, H. and OU, H., 2022. Constitutive modelling of hot deformation behaviour of metallic materials Materials Science & Engineering A. 832, 142473 CHEN, F., TIAN, X., WU, G., ZHU, H., OU, H. and CUI, Z., 2022. Coupled quantitative modeling of microstructural evolution and plastic flow during continuous dynamic recrystallization: International Journal of Plasticity International Journal of Plasticity. 156, ELKINGTON, M. P., MISTRY, P. J., JOHNSON, M. S. and OU, H., 2022. Hybrid vacuum-robotic forming of reinforced composite laminates: Journal of Reinforced Plastics and Composites Journal of Reinforced Plastics and Composites. ZHU, H., OU, H. and POPOV, A., 2021. A new phenomenological constitutive model for thermoplastics Mechanics of Materials. 157, 103817 CHEN, F., ZHU, H., CHEN, W., OU, H. and CUI, Z., 2021. Multiscale modeling of discontinuous dynamic recrystallization during hot working by coupling multilevel cellular automaton and finite element method: International Journal of Plasticity International Journal of Plasticity. 145, 103064 LONG, H., AI, S., TIAN, F., LU, B., CHEN, J. and OU, H., 2021. A New Test Method for Sheet Metal Deformation Subject to Tension Under Cyclic Bending and Compression (TCBC) In: Forming the Future, Proc of 13th Int Conf Technology of Plasticity. 441-455 PENG, W., OU, H. and BECKER, A., 2019. Double-Sided Incremental Forming: A Review: Journal of Manufacturing Science and Engineering, Transactions of the ASME Journal of Manufacturing Science and Engineering, Transactions of the ASME. 141(5), SHAO, Y., OU, H., GUO, P. and YANG, H., 2019. Shape optimization of preform tools in forging of aerofoil using a metamodel-assisted multi-island genetic algorithm: Journal of the Chinese Institute of Engineers, Transactions of the Chinese Institute of Engineers,Series A/Chung-kuo Kung Ch'eng Hsuch K'an Journal of the Chinese Institute of Engineers, Transactions of the Chinese Institute of Engineers,Series A/Chung-kuo Kung Ch'eng Hsuch K'an. S. GATEA, D.K. XU, H. OU and G. MCCARTNEY, 2018. Evaluation of formability and fracture of pure titanium in incremental sheet forming International Journal of Advanced Manufacturing Technology. 95(1-4), 625-641 LU, B., MOHAMED BAZEER, M. W., CAO, J. F., AI, S., CHEN, J., OU, H. and LONG, H., 2017. A study of incremental sheet forming by using water jet: International Journal of Advanced Manufacturing Technology International Journal of Advanced Manufacturing Technology. 91(5-8), 2291-2301 C.L. HU, Q. YIN, Z. ZHAO and H. OU, 2017. A new measuring method for friction factor by using ring with inner boss compression test International Journal of Mechanical Sciences. 123, 133-140 AI, S., LU, B., CHEN, J., LONG, H. and OU, H., 2017. Evaluation of deformation stability and fracture mechanism in incremental sheet forming: International Journal of Mechanical Sciences International Journal of Mechanical Sciences. 124-125, 174-184 D. ZHAO, J.D. DENG, H.J. MAO and D.S. QIAN, 2017. FE simulation and experiment study on flow forming of inner-splined flange Procedia Engineering. 207, 621–626 B. LU, H. OU, S.Q. YING, H. LONG and J. CHEN, 2016. Titanium based cranial reconstruction using incremental sheet forming International Journal of Material Forming. 9(3), 361-370 F. CHEN, H. OU, B. LU and H. LONG, 2016. A constitutive model of polyether-ether-ketone
(PEEK) Journal of the Mechanical Behavior of Biomedical Materials. 53, 427-433 R. LIU, B. LU, D. XU, J. CHEN, F. CHEN, H. OU and H. LONG, 2016. Development of novel tools for electricity-assisted incremental sheet forming of titanium alloy International Journal of Advanced Manufacturing Technology. 85(5), 1137-1144 C.R. CHEN, Y. WANG and H. OU, 2016. Study of weld characteristics for repair using sequential experimental design and artificial neural networks International Journal of Advanced Manufacturing Technology. 84, 1313-1323 S. GATEA, H. OU and G. MCCARTNEY, 2016. Review on the influence of process parameters in incremental sheet forming International Journal of Advanced Manufacturing Technology. 87(1), 479-499 Y. SHAO, B. LU, D.K. XU, J. CHEN, H. OU, H. LONG and P.Y. GUO, 2016. Topology-based preform design optimization for blade forging International Journal of Advanced Manufacturing Technology. 86(1), 1593-1605 Y. WANG, Z. LIU, H. OU, Y. LOU and X. YAN, 2016. Curvature and Residual Stress Analysis in Rotational Leveling of Bars Journal of Iron and Steel Research, International. 23(7), 669-676 C.R. CHEN, Y. WANG, H. OU and Y.J. LIN, 2016. Energy-based approach to thermal fatigue life of tool steels for die casting dies International Journal of Fatigue. 92, 166-178 F CHEN, S. GATEA, H. OU, B. LU and H. LONG, 2016. Fracture characteristics of PEEK at various stress triaxialities Journal of the Mechanical Behavior of Biomedical Materials. 64, 173-186 CAO, T., LU, B., OU, H., LONG, H. and CHEN, J., 2016. Investigation on a new hole-flanging approach by incremental sheet forming through a featured tool: International Journal of Machine Tools and Manufacture International Journal of Machine Tools and Manufacture. 110, 1-17 Y. SHAO, B. LU, H. OU and J. CHEN, 2015. A new approach of preform design for forging of 3D blade based on evolutionary structural optimization Structural and Multidisciplinary Optimization. 51(1), 199-211 B. LU, D.K. XU, R.Z. LIU, H. OU and H. LONG, 2015. Cranial Reconstruction using Double Side Incremental Forming Key Engineering Materials. 639, 535-542 B. LU, Y. FANG, D.K. XU, J. CHEN, A. SHENG, H. LONG, H. OU and J. CAO, 2015. Investigation of deformation mechanism of double side incremental sheet forming process International Journal of Machine Tools and Manufacture. 93, 37-48 M.H. ZHANG, B. LU, J. CHEN, H. LONG and H. OU, 2015. Selective element fission approach for fast FEM simulation of incremental sheet forming based on dual-mesh system International Journal of Advanced Manufacturing Technology. 78(5-8), 1147-1160 F. CHEN, J. LIU, H. OU, B. LU, Z.S. CUI and H. LONG, 2015. Flow characteristics and intrinsic workability of IN718 superalloy Materials Science and Engineering: A. 642, 279-296 O.S. SALIH, H. OU, W. SUN and D.G. MCCARTNEY, 2015. A review of friction stir welding of aluminium matrix composites Materials and Design. 86, 61-71 F. CHEN, B. LU, R.Z. LIU, H. OU, H. LONG and D.K. XU, 2015. Correlation between formability and initial grain
size in incremental sheet metal forming of pure titanium parts In: 34th International Deep Drawing Research Group (IDDRG2015). 376-381
C.R. CHEN, Y. WANG, H. OU, Y. HE and X. TAN, 2014. A review on remanufacture of dies and moulds Journal of Cleaner Production. 64, 13-23 Y. SHAO, B. LU, H. OU, F. REN, J. CHEN, 2014. Evolutionary forging preform design optimization using strain-based criterion International Journal of Advanced Manufacturing Technology. 71(1-4), 69-80 B. LU, Y. FANG, D.K. XU, J. CHEN, H. OU, N.H. MOSER and J. CAO, 2014. Mechanism investigation of friction-related effects in single point incremental forming using a developed oblique roller-ball tool International Journal of Machine Tools and Manufacture. 85, 14-29 Z. LIU, Y. WANG, H. OU and X. YAN, 2014. An analytical leveling model of curvature and residual stress simulation for H-beams Journal of Constructional Steel Research. 102, 13-23 B. LU, J. CHEN, H. OU and J. CAO, 2013. Feature-Based Tool Path Generation Approach for Incremental Sheet Forming Process Journal of Materials Processing Technology. 213(7), 1221-1233 H. OU, B. LU, Z.S. CUI and C. LIN, 2013. Direct Shape Optimization for Minimum Boundary Stress Concentration and Peak Contact Pressure Journal of Mechanical Science and Technology. 27(9), 2751-2759 J. LIU, J.Q. LI, Z.S. CUI and H. OU, 2013. Material driven workability simulation by FEM including 3D processing maps for magnesium alloy Transactions of Non-Ferrous Metals Society of China. 23(10), 3011-3019 B LU and H OU, 2012. Quantification of Press Elasticity in Precision Forging of 3D Complex Shapes Proceedings of the Institution of Mechanical Engineers. Part B, Journal of Engineering Manufacture. 226(3), 466-477 LU, B. and OU, H., 2012. An efficient approach for trimming simulation of 3D forged components International Journal of Mechanical Sciences. 55(1), 30-41 MAKEM, J.E., OU, H. and ARMSTRONG, C.G., 2012. A virtual inspection framework for precision manufacturing of aerofoil components Computer-Aided Design. 44(9), 858-874 LU, B. AND OU, H., 2011. Stochastic finite-element modelling and optimization for net-shape forging of three-dimensional aero-engine blades Proceedings of the Institution of Mechanical Engineers. Part L, Journal of Materials-Design and Applications. 225(L2), 71-85 LU, B., OU, H. and CUI, Z.S., 2011. Shape optimisation of preform design for precision close-die forging Structural and Multidisciplinary Optimization. 44(6), 785-796 B LU, H OU, J CHEN and J CAO, 2011. An adaptive tool path generation and optimisation method for single point incremental sheet forming In: 10th Int Conf on Technology of Plasticity (ICTP2011), Aachen, Germany. 508-512
LU, B., OU, H., ARMSTRONG, C.G. and RENNIE, A., 2009. 3D die shape optimisation for net-shape forging of aerofoil blades Materials & Design. 30(7), 2490-2500 LU, B., OU, H. and ARMSTRONG, C.G., 2008. Quantification of Dimensional and Shape Tolerances in Hot Forging of Aerofoil Blades In: Int. Conf. on Technology of Plasticity (ICTP2008), Gyeongju, Korea, Sept, 2008,. (In Press.)
H. OU, H., LU, B., MAKEM, J., ARMSTRONG, C.G. and NIKOV, S. AND RENNIE, A., 2008. Development of a Virtual Die Shape Optimisation System for Net-Shape Forging of Aeroengine Components Steel Research International. 79(2), 804-811
YOU, L.H. and OU, H., 2008. Steady-State Creep Analysis of Thick-Walled Spherical Pressure Vessels with Varying Creep Properties ASME Transactions, Journal of Pressure Vessel Technology. 130(1), 014501-1--014501-5 MAKEM, J, LU, B., OU, H. ARMSTRONG, C.G, RENNIE, A. and NIKOV, S., 2008. 3D Die Shape Optimisation for Net-Shape Forging of Aeroengine Compressor Blades In: Int. Conf. on Technology of Plasticity (ICTP2008), Gyeongju, Korea, Sept, 2008,. (In Press.)
CG ARMSTRONG, TT ROBINSON and H OU, 2008. Recent Advances in CAD/CAE Technologies for Thin-Walled Structures Design and Analysis In: 5th Int Conf Thin-Walled Structures (ICTWS2008), Brisbane, Australia.
LU, B., OU, H. and ARMSTRONG, C.G., 2007. A Simple Method to Evaluate Trimming Operation on Hot Forged Blade Components In: Proc. 15th ACME Annual Conf., Glasgow, April 2007.. (In Press.)
YOU, L.H., OU, H. and AND LI, J., 2007. Stress Analysis of functionally graded thick-walled cylindrical vessels AIAA Journal. 45(11), 2790-2798. LIN, T.J., OU, H., LI and R.F., 2007. A Finite Element Method for 3D Static and Dynamic Contact/Impact Analysis of Gear Drives Computer Methods in Applied Mechanics and Engineering. 196(1-2), 1716-1728 MAKEM, J., OU, H. and ARMSTRONG, C.G., 2007. An Approach for Shape Error Quantification in Forging Compressor Blades Using FE Modelling and CMM Inspection In: Proc. 15th ACME Annual Conf., Glasgow, April 2007..
OU, H., LAN, J., ARMSTRONG, C.G., PRICE, M.A., WALLØE, S.J. and WARD, M.J., 2006. Reduction in Post Forging Errors for Aerofoil Forging Using Finite Element Simulation and Optimisation Modelling and Simulation in Materials Science and Engineering. 14(2), 179-193 OU, H., 2006. Prediction of Dimensional Errors in 3D Complex Shapes due to Press Elasticity International Journal of Advanced Manufacturing Technology. 31(1-2), 61-70 ROBINSON, T.T., ARMSTRONG, C.G., MCSPARRON, G., OU, H and MCKEAG, R.M., 2006. Automated Dimensional Reduction for the Finite Element Modelling of Sketch based CAD Components In: Proc. SPM 2006 - ACM Symposium on Solid and Physical Modeling, Cardiff, UK, June 2006.. 117-128
LIN, T.J., LI, R.F., LONG, H. and OU, H., 2006. 3D Transient Sealing Analysis of Reactor Pressure Vessel Flanges Nuclear Engineering and Design. 236(24), 2599-2607 ROBINSON, T.T., ARMSTRONG, C.G., LEE, K.Y. and OU, H., 2005. Automatic Mixed Dimensional Finite Element Modelling of Sketch Based CAD Components In: Proc. 13th ACME Annual Conf., Sheffield, UK, March, 2005.. 79-82
LI, R.F, LIN,T.J., OU, H. and GUO, X.D., 2005. Finite Element Simulation of the Dynamic Contact/Impact Behavior of Hypoid Gears VDI Berichte. 1904(I), 581-590
GREENE, R.M., OU, H. and ARMSTRONG, C.G., 2005. Die Shape Modification in Forging Simulation of Aerospace Components In: Proc. 13th ACME Annual Conf., Sheffield, UK, March, 2005.. 115-118
LIN, T.J., LI, R.F. and OU, H., 2005. 3D Transient Seal Analysis of Reactor Pressure Vessel Using Coupled Thermo-Elasto-Plastic Contact Method In: Proc. 13th ACME Annual Conf., Sheffield, UK, March, 2005.. 83-86
OU, H., LAN, J., ARMSTRONG, C.G. and PRICE, M.A., 2004. A FE Simulation and Optimisation Approach for Forging of Aeroengine Components Journal of Materials Processing Technology. 151(1-3), 208-216 OU, H., LAN, L., ARMSTRONG, C.G., PRICE, M., WALLØE, S.J. and WARD, M.J., 2004. Net-Shape Forging of Aerofoil Blades Using Finite Element Simulation and Optimisation In: Proc. 7th Esaform Conf. on Material Forming (ESAFORM 2004), Trondheim, Norway, April, 2004.. 663-666
MUCUNE, R.W., OU, H., ARMSTRONG, C.G. and PRICE, M.A., 2004. Modelling Friction Stir Welding with the Finite Element Method – a Comparative Study In: Proc. 5th Int. FSW Symposium, Metz, France, Sept. 2004.
OU, H., LAN, J., ARMSTRONG, C.G., WALLØE, S.J. and WARD, M.J., 2004. Direct Die Shape Compensation for Forging of Ni-Based Aerofoil Blades In: Proc. 8th Int. Conf. on Numerical Methods in Industrial Forming Processes (NUMIFORM 2004), Columbus, Ohio, USA, June, 2004.. 382-387
ROBINSON, T., OU, H. and ARMSTRONG, C.G., 2004. Study on Ring Compression Test Using Physical Modelling and FE Simulation Journal of Materials Processing Technology. 153-154, 54-59 KHAMASSI, A., ARMSTRONG, C.G. and OU, H., 2003. A Simplified Approach to Evaluating Weld Induced Distortions In: Proc. 11th ACME conf., Glasgow, UK, April, 2003.. 21-24
PRICE, M., MCCLATCHEY, G., GIBSON, A., MURPHY, A., CURRAN, R., OU, H. and ARMSTRONG, C., 2003. Design of Welded Aluminium Fuselage Panels for Improved Fatigue Performance In: Proc. Int. Conf. on Metal Fabrication and Welding Technology, Nottingham, UK, Sept, 2003.. 75-84
OU, H., LAN, J., PRICE, M.A. and ARMSTRONG, C.G., 2003. Development of a FE Simulation and Optimisation System for Net-Shape Forging of Aeroengine Components In: Proc. Int. Conf. on Metal Fabrication and Welding Technology, Nottingham, UK, Sept, 2003.. 141-150
OU, H., 2003. A Matrix Approach for Forging Error Assessment International Journal for Manufacturing Science and Production. 5, 63-66
MAWHINNEY, P., PRICE, M., ARMSTRONG, C., RAGHUNATHAN, S., OU, H., MURPHY, A. and CURRAN, R., 2003. Using Idealised Models to Enable Analysis Driven Design In: Proc. AIAA's 3rd Annual Aviation Technology, Integration and Operations (ATIO) Technical Forum, Denver, USA, Nov. 2003.
LAN, J., OU, H., ARMSTRONG, C.G. and PRICE, M.A., 2003. The Forging Simulation using Rigid-Plastic FEA In: Proc. 11th ACME conf., Glasgow, UK, April, 2003.. 205-208
OU, H., ARMSTRONG, C.G. and PRICE, M.A., 2003. Die Shape Optimisation in Forging of Aerofoil Sections Journal of Materials Processing Technology. 132(1-3), 21-27
MCKEAG, R.M., ARMSTRONG, C.G., ROBISON, D.J., PRICE,M.A., OU, H., MCCUNE, R.W. and MONAGHAN, D.J., 2002. The Medial Axis Transform - an illustrated tutorial In: Proc. 3rd Irish Workshop on Computer Graphics, Dublin, Ireland, April, 2002.. 63-73
OU, H. and ARMSTRONG, C.G., 2002. Hot Forging Simulation for Aerofoil Components during Cyclic Forming Conditions In: Proc. 5th Int. EASFORM Conf. on Material Forming, Krakow, Poland, April, 2002.. 399-402
OU, H. and ARMSTRONG, C.G., 2002. Inclusion of Press-Elasticity in Forging Simulation for Aerofoil Sections In: Proc. 7th Int. Conf. on Technology of Plasticity (ICTP 2002), Yokohama, Japan, October, 2002.. 163-168
ARMSTRONG, C.G., MONAGHAN, D.J., PRICE, M.A., OU, H. and LAMONT, J., 2002. Integrating CAE Concepts with CAD Geometry. In: TOPPING B.H.V. and BITTNAR, Z., eds., Engineering computational technology 75-104
OU, H. and ARMSTRONG, C.G., 2002. A Die Shape Compensation in Hot Forging of Titanium Aerofoil Sections Journal of Materials Processing Technology. 125-126, 347-352
OU, H., FERGUSON, W.H. and BALENDRA, R., 1999. Assessment of the Elastic Characteristics of an 'infinite Stiffness' Physical Modelling Press Journal of Materials Processing Technology. 87(1-3), 28-36 OU, H. and BALENDRA, R., 1998. Preform Design for Forging of Aerofoil Sections using FE Simulation Journal of Materials Processing Technology. 80-81, 144-148 OU, H. and BALENDRA, R., 1998. Die-elasticity for Precision Forging of Aerofoil Section Using Finite Element Simulation Journal of Materials Processing Technology. 76(1-3), 56-61