DAURE, J. L., KÓTI, D., CARRINGTON, M. J., MCCARTNEY, D. G., STEWART, D. A. and SHIPWAY, P. H., 2023. Galling of stainless steels as a function of test conditions in an ASTM G196-type test setup – The role of temperature, rotational velocity, interrupted rotation and rotational distance: Wear Wear. 524-525, LAOLU-BALOGUN, E., OWEN, S., BOOTH, T., PATTINSON, G., SHIPWAY, P. H. and VOISEY, K. T., 2023. Lifetime of MoS2 based DFL systems in fretting with and without a Cu-Ni-In under-layer: The dependence on the topography of the surface onto which the DFL is deposited: Tribology International Tribology International. 188, ALTINOZEN, E., HARRISON, I., VUKOVIC, A. and SEWELL, P., 2022. Systematic Generation of Arbitrary Antenna Geometries: IEEE Transactions on Antennas and Propagation IEEE Transactions on Antennas and Propagation. ROGERS, S. R., DAURE, J., SHIPWAY, P., STEWART, D. and DYE, D., 2022. Adhesive transfer operates during galling: Scripta Materialia Scripta Materialia. 221, CARRINGTON, M. J., DAURE, J. L., RATIA-HANBY, V. L., ZHANG, D., SHIPWAY, P. H., STEWART, D. A. and MCCARTNEY, D. G., 2021. Microstructural characterisation of subsurface deformation and the degradation of Stellite 6 induced by self-mated sliding contact in a simulated PWR environment: Tribology International Tribology International. 158, LAOLU-BALOGUN, E., OWEN, S. P., READ, S., PATTINSON, G., SHIPWAY, P. H. and VOISEY, K. T., 2021. Effects of Ti-6Al-4 V Surface Condition on the Performance of DFL Lifetimes VENTER, A. M., LUZIN, V., MARAIS, D., SACKS, N., OGUNMUYIWA, E. N. and SHIPWAY, P. H., 2020. Interdependence of slurry erosion wear performance and residual stress in WC-12wt%Co and WC-10wt%VC-12wt%Co HVOF coatings: International Journal of Refractory Metals and Hard Materials International Journal of Refractory Metals and Hard Materials. 87, CARRINGTON, M. J., DAURE, J., RATIA, V. L., SHIPWAY, P. H., MCCARTNEY, D. G. and STEWART, D. A., 2019. Microstructural characterisation of Tristelle 5183 (Fe-21%Cr-10%Ni-7.5%Nb-5%Si-2%C in wt%) alloy powder produced by gas atomisation: Materials and Design 164, RATIA, V. L., ZHANG, D., DAURE, J. L., SHIPWAY, P. H., MCCARTNEY, D. G. and STEWART, D. A., 2019. Sliding wear of a self-mated thermally sprayed chromium oxide coating in a simulated PWR water environment: Wear Wear. RATIA, V. L., ZHANG, D., CARRINGTON, M. J., DAURE, J. L., MCCARTNEY, D. G., SHIPWAY, P. H. and STEWART, D. A., 2019. Comparison of the sliding wear behaviour of self-mated HIPed Stellite 3 and Stellite 6 in a simulated PWR water environment: Wear Wear. REDDY, L., SATTARI, M., DAVIS, C. J., SHIPWAY, P. H., HALVARSSON, M. and HUSSAIN, T., 2019. Influence of KCl and HCl on a laser clad FeCrAl alloy: In-Situ SEM and controlled environment High temperature corrosion: Corrosion Science Corrosion Science. REDDY, L., SATTARI, M., DAVIS, C. J., SHIPWAY, P. H., HALVARSSON, M. and HUSSAIN, T., 2019. Influence of KCl and HCl on a laser clad FeCrAl alloy: In-Situ SEM and controlled environment High temperature corrosion: Corrosion Science Corrosion Science. REDDY, L., SATTARI, M., DAVIS, C. J., SHIPWAY, P. H., HALVARSSON, M. and HUSSAIN, T., 2019. Influence of KCl and HCl on a laser clad FeCrAl alloy: In-Situ SEM and controlled environment High temperature corrosion: Corrosion Science Corrosion Science. REDDY, L., SATTARI, M., DAVIS, C. J., SHIPWAY, P. H., HALVARSSON, M. and HUSSAIN, T., 2019. Influence of KCl and HCl on a laser clad FeCrAl alloy: In-Situ SEM and controlled environment High temperature corrosion: Corrosion Science Corrosion Science. KARIMI, G. N., CARRINGTON, M. J., THOMAS, J., SHIPWAY, P. H., STEWART, D. A. and HUSSAIN, T., 2019. The role of microstructural development in the hydrothermal corrosion of cast and HIPed Stellite 6 analogues in simulated PWR conditions: Corrosion Science Corrosion Science. RATIA, V. L., CARRINGTON, M. J., ZHANG, D., DAURE, J. L., MCCARTNEY, D. G., SHIPWAY, P. H. and STEWART, D. A., 2019. Tribocorrosion phenomena in co- And Fe-based hardfacing alloys evaluated using pin-in-on-disc wear tests in a simulated PWR environment QIN, W., JIN, X., KIRK, A., SHIPWAY, P. H. and SUN, W., 2018. Effects of surface roughness on local friction and temperature distributions in a steel-on-steel fretting contact: Tribology International Tribology International. 120, 350-357 MENG, X. S., SEWELL, P., VUKOVIC, A., ZHANG, Z. W., BENSON, T. M., JONES, C., EARL, S., WALTON, R. and SOUTH, G., 2018. Numerical simulation of electromagnetic coupling in explicitly meshed wiring looms and bundles: Iet Science Measurement & Technology Iet Science Measurement & Technology. 12(2), 176-181 REDDY, L., PRESTON, S. P., SHIPWAY, P. H., DAVIS, C. and HUSSAIN, T., 2018. Process parameter optimisation of laser clad iron based alloy: Predictive models of deposition efficiency, porosity and dilution: Surface and Coatings Technology Surface and Coatings Technology. 349, 198-207 KARIMI, G. N., SHIPWAY, P. H., STEWART, D. A. and HUSSAIN, T., 2018. Corrosion of cast Stellite-3 analogue in simulated PWR conditions: Corrosion Science Corrosion Science. DAURE, J. L., CARRINGTON, M. J., SHIPWAY, P. H., MCCARTNEY, D. G. and STEWART, D. A., 2018. A comparison of the galling wear behaviour of PVD Cr and electroplated hard Cr thin films: Surface and Coatings Technology Surface and Coatings Technology. 350, 40-47 RATIA, V. L., ZHANG, D., CARRINGTON, M. J., DAURE, J. L., MCCARTNEY, D. G., SHIPWAY, P. H. and STEWART, D. A., 2018. The effect of temperature on sliding wear of self-mated HIPed Stellite 6 in a simulated PWR water environment: Wear Wear. A.F. HASAN, C.J. BENNETT, P.H. SHIPWAY, S. CATER and J. MARTIN, 2017. A numerical methodology for predicting tool wear in Friction Stir Welding Journal of Materials Processing Technology. 241, 129-140 PACELLA, M., AXINTE, D. A., BUTLER-SMITH, P. W., SHIPWAY, P., DAINE, M. and WORT, C., 2016. An Assessment of the Wear Characteristics of Microcutting Arrays Produced from Polycrystalline Diamond and Cubic Boron Nitride Composites: Journal of Manufacturing Science and Engineering, Transactions of the ASME Journal of Manufacturing Science and Engineering, Transactions of the ASME. 138(2), O'HALLORAN S M, SHIPWAY P H, CONNAIRE A D, LEEN S B and HARTE A M, 2016. A combined wear-fatigue design methodology for fretting in the pressure armour layer of flexible marine risers Tribology International. (In Press.)
WARMUTH, A.R., SHIPWAY, P.H. and SUN, W., 2015. Fretting wear mapping: The influence of contact geometry and frequency on debris formation and ejection for a steel-on-steel pair Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences. 471(2178), 20140291 Z. KAMDI, P.H. SHIPWAY and K.T. VOISEY, 2014. A Modified Micro-Scale Abrasion for Large Hard Phase Cermet Applied Mechanics and Materials. 393, 888-892 BENNETT, C.J., ATTALLAH, M.M., PREUSS, M., SHIPWAY, P.H., HYDE, T.H. and BRAY, S., 2013. Finite element modeling of the inertia friction welding of dissimilar high-strength steels Metallurgical and Materials Transactions A. 44(11), 5054-5064 S.R. PEARSON, P.H. SHIPWAY, J.O. ABERE and R.A.A. HEWITT, 2013. The effect of temperature on wear and friction of a high strength steel in fretting Wear. 303, 622-631 ROBERTS A., BROOKS R., SHIPWAY P., DOMINY J., GILCHRIST R., HELLE-LORENTZEN R., 2013. Reducing thermal losses from automotive lubricant circuits during cold start by the application of polymer insulation: Institution of Mechanical Engineers - VTMS 2011, Vehicle Thermal Management Systems Conference Proceedings In:
KAMDI Z., SHIPWAY P.H., VOISEY K.T., 2013. Micro-scale abrasion of WC-based coatings with different abrasive type Applied Mechanics and Materials. TANNER, D. W. J., CHALK, K., SUN, W., SHIPWAY, P. H. and HYDE, T. H., 2012. A comparison of three weld consumables for P92 under creep MATERIALS AT HIGH TEMPERATURES. 29(4), 359-367 HUSSAIN, T., MCCARTNEY, D. G. and SHIPWAY, P. H., 2012. Bonding between aluminium and copper in cold spraying: story of asymmetry MATERIALS SCIENCE AND TECHNOLOGY. 28(12), 1371-1378 BENNETT, C.J., HYDE, T.H. and SHIPWAY, P.H., 2011. A transient finite element analysis of thermoelastic effects during inertia friction welding Computational Materials Science. 50(9), 2592-2598 HUSSAIN, T., MCCARTNEY, D.G. and SHIPWAY, P.H., 2011. Impact phenomena in cold-spraying of titanium onto various ferrous alloys Surface and Coatings Technology. 205(21-22), 5021-5027 CARPENTER, C.R., SHIPWAY, P.H. and ZHU, Y., 2011. The influence of CNT co-deposition on electrodeposit grain size and hardness Surface and Coatings Technology. 205(21-22), 5059-5063 CARPENTER, CR, SHIPWAY, PH, ZHU, Y and WESTON, DP, 2011. Effective Dispersal Of Cnts In The Fabrication Of Electrodeposited Nanocomposites Surface & Coatings Technology. 205(20), 4832-4837 MARROCCO, T, HUSSAIN, T, MCCARTNEY, DG and SHIPWAY, PH, 2011. Corrosion Performance Of Laser Posttreated Cold Sprayed Titanium Coatings Journal Of Thermal Spray Technology. 20(4), 909-917 TABBARA, H., GU, S., MCCARTNEY, D.G., PRICE, T.S. and SHIPWAY, P.H., 2011. Study on process optimization of cold gas spraying Journal Of Thermal Spray Technology. 20(3), 608-620 HUSSAIN, T, MCCARTNEY, DG, SHIPWAY, PH and MARROCCO, T, 2011. Corrosion Behavior Of Cold Sprayed Titanium Coatings And Free Standing Deposits Journal of thermal Spray Technology. 260-274 BENNETT, C.J., LEEN, S.B., WILLIAMS, E.J., SHIPWAY, P.H. and HYDE, T.H., 2010. A critical analysis of plastic flow behaviour in axisymmetric isothermal and Gleeble compression testing Computational Materials Science. 50(1), 125-137 WESTON, DP, HARRIS, SJ, SHIPWAY, PH, WESTON, NJ and YAP, GN, 2010. Establishing Relationships Between Bath Chemistry, Electrodeposition And Microstructure Of Co-W Alloy Coatings Produced From A Gluconate Bath Electrochimica Acta. 55(20), 5695-5708 WESTON, DP, HARRIS, SJ, CAPEL, H, AHMED, N, SHIPWAY, PH and YELLUP, JM, 2010. Nanostructured Co-W Coatings Produced By Electrodeposition To Replace Hard Cr On Aerospace Components Transactions Of The Institute Of Metal Finishing. 88(1), 47-56 MOHD TOBI, A.L., DING, J., PEARSON, S., LEEN, S.B. and SHIPWAY, P.H., 2010. The effect of gross sliding fretting wear on stress distributions in thin W-DLC coating systems Tribology International. 43(10), 1917-1932 CHOKETHAWAI, K., MCCARTNEY, D. G. and SHIPWAY, P. H., 2009. Microstructure evolution and thermal stability of an Fe-based amorphous alloy powder and thermally sprayed coatings. VOL 480(NUMBER 2), 351-359
ZHANG, Y., SHIPWAY, P.H. and BOUE-BIGNE, F., 2009. Characterisation of creep-weak zones (white bands) in grade 91 weld metal Science and Technology of Welding and Joining. 14, 542-548 FOWLER, G., PASHBY, I. R. and SHIPWAY, P. H., 2009. The effect of particle hardness and shape when abrasive water jet milling titanium alloy Ti6Al4V. VOL 266(NUMBER 7-8), 613-620
DING, J., LEEN, S.B., WILLIAMS, E.J. and SHIPWAY, P.H., 2009. A multi-scale model for fretting wear with oxidation-debris effects Proceedings of the Institution of Mechanical Engineers. Part J: Journal of Engineering Tribology. 223(7), 1019-1031 WESTON, D. P., SHIPWAY, P. H., HARRIS, S. J. and CHENG, M. K., 2009. Friction and sliding wear behaviour of electrodeposited cobalt and cobalt-tungsten alloy coatings for replacement of electrodeposited chromium. VOL 267(NUMBER 5-8), 934-943
SHIPWAY, P. H. and WESTON, D. P., 2009. Thermal effects in blasting and erosion of polymeric materials. VOL 209(NUMBER 20), 6161-6167
BAKSHI, S. R., WANG, D., PRICE, T., ZHANG, D., KESHRI, A. K., CHEN, Y., MCCARTNEY, D. G., SHIPWAY, P. H. and AGARWAL, A., 2009. Microstructure and wear properties of aluminum/aluminum-silicon composite coatings prepared by cold spraying. VOL 204(NUMBER 4), 503-510
SRINIVASU, D. S., AXINTE, D. A., SHIPWAY, P. H. and FOLKES, J., 2009. Influence of kinematic operating parameters on kerf geometry in abrasive waterjet machining of silicon carbide ceramics. VOL 49(NUMBER 14), 1077-1088
MOHD TOBI, A.L., DING, J., BANDAK, G., LEEN, S.B. and SHIPWAY, P.H., 2009. A study on the interaction between fretting wear and cyclic plasticity for Ti-6Al-4V Wear. 267(1-4), 270-282 DING, J., BANDAK, G., LEEN, S.B., WILLIAMS, E.J. and SHIPWAY, P.H., 2009. Experimental characterisation and numerical simulation of contact evolution effect on fretting crack nucleation for Ti-6Al-4V. VOL 42(NUMB 11/12), 1651-1662
NAHVI, S. M., SHIPWAY, P. H. and MCCARTNEY, D. G., 2009. Particle motion and modes of wear in the dry sand-rubber wheel abrasion test. VOL 267(NUMBER 11), 2083-2091
EVERITT, N.M., DING, J., BANDAK, G., SHIPWAY, P.H., LEEN, S.B. and WILLIAMS, E.J., 2009. Characterisation of fretting-induced wear debris for Ti-6Al-4 V Wear. 267(1-4), 283-291 SRINIVASU, DS, AXINTE, DA, SHIPWAY, PH and FOLKES, J, 2009. Influence Of Kinematic Operating Parameters On Kerf Geometry In Abrasive Waterjet Machining Of Silicon Carbide Ceramics International Journal Of Machine Tools & Manufacture. 49(14), 1077-1088 BAKSHI, SR, WANG, D, PRICE, T, ZHANG, D, KESHRI, AK, CHEN, Y, MCCARTNEY, DG, SHIPWAY, PH and AGARWAL, A, 2009. Microstructure And Wear Properties Of Aluminum/Aluminum-Silicon Composite Coatings Prepared By Cold Spraying Surface & Coatings Technology. 204(4), 503-510 HUSSAIN, T., MCCARTNEY, D.G., SHIPWAY, P.H. and ZHANG, D., 2009. Bonding mechanisms in cold spraying: the contributions of metallurgical and mechanical components Journal of Thermal Spray Technology. 18(3), 364-379 ZHANG, Y, SHIPWAY, PH and BOUE-BIGNE, F, 2009. Characterisation Of Creep-Weak Zones (White Bands) In Grade 91 Weld Metal Science And Technology Of Welding And Joining. 14(6), 542-548 EVERITT, NM, DING, J, BANDAK, G, SHIPWAY, PH, LEEN, SB and WILLIAMS, EJ, 2009. Characterisation Of Fretting-Induced Wear Debris For Ti-6Al-4 V T.H. HYDE, W. SUN, A.A. BECKER, S.B. LEEN, P.H. SHIPWAY, Y. ZHANG, R.C. THOMSON, A.H. YAGHI and J. SANCHEZ-HANTON, 2009. A holistic approach to structural integrity of high temperature welds in power plants 4, 17-22
DING, J, LEEN, SB, WILLIAMS, EJ and SHIPWAY, PH, 2009. A Multi-Scale Model For Fretting Wear With Oxidation-Debris Effects Proc. IMechE Part J: J. Engineering Tribology. 223, 1019-1031 BUCHANAN, V. E., MCCARTNEY, D. G. and SHIPWAY, P. H., 2008. A comparison of the abrasive wear behaviour of iron-chromium based hardfaced coatings deposited by SMAW and electric arc spraying WEAR -LAUSANNE-. VOL 264(NUMBER 7-8), 542-549
DING, J., LEEN, S.B, WILLIAMS, E.J. and SHIPWAY, P.H., 2008. Finite element simulation of fretting wear - fatigue interaction in spline couplings Tribology – Materials, Surfaces and Interfaces. 2, 10-24
MADGE, J.J., LEEN, S.B. and SHIPWAY, P.H., 2008. A combined wear and crack nucleation-propagation methodology for fretting fatigue prediction International Journal of Fatigue. 30(9), 1509-1528 ZHANG, D., HARRIS, S.J., MCCARTNEY, D.G., PASHBY, I.R., POWELL, J., SHIPWAY, P.H. and VOISEY, K.T., 2008. The effect of laser transformation notching on the controlled fracture of a high carbon (C70S6) steel Materials Science and Engineering A: Structural Materials:Properties, Microstructure and Processing. 489(1-2), 273-284 DEGNAN, C. C., KENNEDY, A. R. and SHIPWAY, P. H., 2007. Relationship between physical structure and machinability of green compacts POWDER METALLURGY. VOL 50(NUMB 1), 14-20 HOSKING, N.C., STRÖM, M.A., SHIPWAY, P.H. and RUDD, C.D., 2007. Corrosion resistance of zinc-magnesium coated steel Corrosion Science. 49(9), 3669-3695 MADGE, J. J., LEEN, S. B. and SHIPWAY, P. H., 2007. The critical role of fretting wear in the analysis of fretting fatigue WEAR -LAUSANNE-. VOL 263(NUMBER 1-6), 542-551 ZHANG Y, SHIPWAY P. H and HYDE T. H. AND SUN W., 2007. Anisotropy creep behaviour of P91 weld metal - a microstructural study In: Proc. of 3rd Int. Conf. on Integrity of High Temp. Welds, IoM London April 2007. 373-388
DING, J., MCCOLL, I. R., LEEN, S. B. and SHIPWAY, P. H., 2007. A finite element based approach to simulating the effects of debris on fretting wear WEAR -LAUSANNE-. VOL 263(NUMBER 1-6), 481-491 PRICE, T. S., SHIPWAY, P. H., MCCARTNEY, D. G., CALLA, E. and ZHANG, D., 2007. A Method for Characterizing the Degree of Inter-particle Bond Formation in Cold Sprayed Coatings JOURNAL OF THERMAL SPRAY TECHNOLOGY. VOL 16(NUMBER 4), 566-570 SHIPWAY, P. H., BROMLEY, J. P. and WESTON, D. P., 2007. Removal of coatings from polymer substrates by solid particle blasting to enhance reuse or recycling WEAR -LAUSANNE-. VOL 263(NUMBER 1-6), 309-317 MADGE, J. J., LEEN, S. B., MCCOLL, I. R. and SHIPWAY, P. H., 2007. Contact-evolution based prediction of fretting fatigue life: Effect of slip amplitude WEAR -LAUSANNE-. VOL 262(NUMBER 9-10), 1159-1170 BANSAL, P., SHIPWAY, P.H. and LEEN, S.B., 2007. A hybrid implicit-explicit finite element methodology for coating formation in the high-velocity oxy-fuel process Proceedings of the Institution of Mechanical Engineers. Part L, Journal of Materials. 221, 285-297 CALLA, E., MCCARTNEY, D.G. and SHIPWAY, P.H., 2006. Effect of deposition conditions on the properties and annealing behavior of cold-sprayed copper Journal of Thermal Spray Technology. 15(2), 255-262 MARROCCO, T., MCCARTNEY, D.G., SHIPWAY, P.H. and STURGEON, A.J., 2006. Production of titanium deposits by cold-gas dynamic spray: numerical modeling and experimental characterization Journal of Thermal Spray Technology. 15(2), 263-272 PRICE, T. S., SHIPWAY, P. H. and MCCARTNEY, D. G., 2006. Effect of Cold Spray Deposition of a Titanium Coating on Fatigue Behavior of a Titanium Alloy JOURNAL OF THERMAL SPRAY TECHNOLOGY. VOL 15(NUMB 4), 507-512 BANSAL, P., SHIPWAY, P. H. and LEEN, S. B., 2006. Effect of Particle Impact on Residual Stress Development in HVOF Sprayed Coatings JOURNAL OF THERMAL SPRAY TECHNOLOGY. VOL 15(NUMB 4), 570-575 BANSAL, P., SHIPWAY, P. H. and LEEN, S. B., 2006. Finite element modelling of the fracture behaviour of brittle coatings Surface and Coatings Technology. VOL 200(NUMBER 18-19), 5318-5327 BANSAL, P., SHIPWAY, P.H., LEEN, S.B. and DRIVER, L.C., 2006. Experimental validation of FE predicted fracture behaviour in thermally sprayed coatings Materials Science & Engineering. A, Structural materials: properties, microstructures and processing. 430(1-2), 104-112 HARRIS, S. J., WESTON, D. P. and SHIPWAY, P. H., 2006. Development of Nanostructured Coatings for Advanced Engineering Applications VDI BERICHTE. VOL 1940, 75-80
HORLOCK, A.J., SADEGHIAN, Z., MCCARTNEY, D.G. and SHIPWAY, P.H., 2005. High-velocity oxyfuel reactive spraying of mechanically alloyed Ni-Ti-C powders Journal of Thermal Spray Technology. 14(1), 77-84 ZHANG, D., SHIPWAY, P.H. and MCCARTNEY, D.G., 2005. Cold gas dynamic spraying of aluminum: the role of substrate characteristics in deposit formation Journal of Thermal Spray Technology. 14(1), 109-116 SHIPWAY, P. H., MCCARTNEY, D. G. and SUDAPRASERT, T., 2005. Sliding wear behaviour of conventional and nanostructured HVOF sprayed WC-Co coatings Wear. VOL 259(NO 7/12), 820-827 DEGNAN, C. C., KENNEDY, A. R. and SHIPWAY, P. H., 2005. Fracture behaviour of notched and un-notched powder metallurgical (P/M) green compacts Journal of Materials Science. VOL 40(NUMBER 15), 4117-4119 FOWLER, G., SHIPWAY, P.H. and PASHBY, I.R., 2005. A technical note on grit embedment following abrasive water-jet milling of a titanium alloy Journal of Materials Processing Technology. 159(3), 356-368 DINELLI, F., LEGGETT, G.J. and SHIPWAY, P.H., 2005. Nanowear of polystyrene surfaces: molecular entanglement and bundle formation Nanotechnology. 16(6), 675-682 CHEN, H., XU, C., QU, J., HUTCHINGS, I. M., SHIPWAY, P. H. and LIU, J., 2005. Sliding wear behaviour of laser clad coatings based upon a nickel-based self-fluxing alloy co-deposited with conventional and nanostructured tungsten carbide-cobalt hardmetals Wear. VOL 259(NO 7/12), 801-806 CHEN, H., XU, C., ZHOU, Q., HUTCHINGS, I. M., SHIPWAY, P. H. and LIU, J., 2005. Micro-scale abrasive wear behaviour of HVOF sprayed and laser-remelted conventional and nanostructured WC-Co coatings Wear. VOL 258(NO 1-4), 333-338 SHIPWAY, P. H., SCOTCHFORD, C. A., SIM, B., MCCARTNEY, D. G. and ZHANG, D., 2004. Improved Titanium Coatings for Biomedical Applications Using Cold Gas Spraying WORLD BIOMATERIALS CONGRESS. CONF 7, 787
DEGNAN, C. C., KENNEDY, A. R. and SHIPWAY, P. H., 2004. Fracture toughness measurements of powder metallurgical (P/M) green compacts A novel method of sample preparation Journal of Materials Science. VOL 39(NUMBER 7), 2605-2607 DEGNAN, C.C., SHIPWAY, P.H. and KENNEDY, A.R., 2004. Comparison of the green strength of warm compacted Astaloy CrM and Distaloy AE Densmix powder compacts Materials Science and Technology. 20(6), 731-738 ZARRINFAR, N., KENNEDY, A.R. and SHIPWAY, P.H., 2004. Reaction synthesis of Cu-TiCx master-alloys for the production of copper-based composites Scripta Materialia. 50(7), 949-952 STALLARD, J., MERCS, D., JARRATT, M., TEER, D. G. and SHIPWAY, P. H., 2004. A study of the tribological behaviour of three carbon-based coatings, tested in air, water and oil environments at high loads Surface and Coatings Technology. VOL 177-178(NUMBER), 545-551 CALLA, E., MCCARTNEY, D. G. and SHIPWAY, P. H., 2004. Deposition of Copper by Cold Gas Dynamic Spraying: An Investigation of Dependence of Microstructure and Properties of the Deposits on the Spraying Conditions THERMAL SPRAY -PROCEEDINGS-. YEAR, 352-357
ZARRINFAR, N., KENNEDY, A. R., SHIPWAY, P. H. and SAIDI, A., 2003. Effects of Ti powder size and ignition method on products of SHS reaction in Cu-Ti-C system Powder Metallurgy. VOL 46(PART 2), 154-158 DRIVER, L.C., SHIPWAY, P.H., MCCARTNEY, D.G., DONOHUE, L.A. and RICKERBY, D.S., 2003. Acoustic Emission as a Tool for Characterizing HVOF-Sprayed WC-Co Coatings In: Thermal Spray 2003: Advancing the Science and Applying the Technology. 810-807
HYDE,T.H., SUN,W., AGYAKWA,P., SHIPWAY,P.H. and WILLIAMS,J.A., 2003. Anisotropic creep and fracture behaviour of a 9CrMoN6V weld metal at 650?C. In: SKRZYPEK, J. and GANCZARSKI, A.W., eds., Anisotropic Behaviour of Damaged Materials Springer-Verlag, Heidelberg.
HYDE,T.H., SUN,W., AGYAKWA,P.A., SHIPWAY,P.H. and WILLIAMS,J.A., 2003. Anisotropic creep and fracture behaviour of a 9CrMoN6V weld metal at 650?C. In: J.J. SKRZYPEK, J.J. and GANCZARSKI, A.W., eds., Anisotropic Behaviour of Damaged Materials Chapter 9. Springer-Verlag, Heidelberg. 295-316
ZHANG, D., SHIPWAY, P.H. and MCCARTNEY, D.G., 2003. Particle-substrate interactions in cold gas dynamic spraying In: Thermal Spray 2003: Advancing the Science and Applying the Technology. 45-52
HORLOCK, A.J., SADEGHIAN, Z., MCCARTNEY, D.G. and SHIPWAY, P.H., 2003. HVOF reactive spraying of mechanically alloyed Ni-Ti-C powders In: Thermal Spray 2003: Advancing the Science and Applying the Technology. 335-342
SHIPWAY, P., FOWLER, G. and PASHBY, I.R., 2003. Characteristics of the Surface of a Titanium Alloy Following Milling with Abrasive Waterjets In: International Conference on Abrasive and Erosive Wear.
HYDE, T. H., SUN, W., AGYAKWA, P. A., SHIPWAY, P. H. and WILLIAMS, J. A., 2003. Anisotropic Creep and Fracture Behaviour of a 9CrMoNbV Weld Metal at 650^oC LECTURE NOTES IN APPLIED AND COMPUTATIONAL MECHANICS. VOL 9, 295-316
SHIPWAY, P. H. and NGAO, N. K., 2003. Microscale abrasive wear of polymeric materials Wear. VOL 255(NUMBER 1-6), 742-750 HORLOCK, A.J., MCCARTNEY, D.G., SHIPWAY, P.H. and WOOD, J.V., 2002. Thermally sprayed Ni(Cr)-TiB2 coatings using powder produced by self-propagating high temperature synthesis: microstructure and abrasive wear behaviour Materials Science and Engineering. A, Structural materials: properties, microstructures and processing. 336(1-2), 88 - 98 ZHANG, D., SHIPWAY, P.H. and MCCARTNEY, D.G., 2002. The effect of processing variables on deposition characteristics of aluminium by cold gas dynamic spraying In: Proc. 3rd Int. Conf. Surface Eng.. 105-110
HYDE, T.H., SUN, P., AGYAKWA, P., SHIPWAY, P. and WILLIAMS, J.A., 2002. Anisotropic creep and fracture behaviour of a 9CrMoNbV Weld Metal at 650§C In: CONFERENCE ON ANISOTROPIC BEHAVIOUR OF DAMAGED MATERIALS (ABDM). 1-22
SUDAPRASERT, T., MCCARTNEY, D.G. and SHIPWAY, P.H., 2002. Role of spray system and powder feedstock on sliding wear behaviour of WC-Co HVOF sprayed coatings In: Proc. Int. Thermal Spray Conf. 494-499
CAPEL, H., SHIPWAY, P.H. and HARRIS, S.J., 2002. Enhancement of Co-W electrodeposits on cast iron and steel substrates by use of a cobalt strike In: Proc. AESF SUR/FIN, American Electroplaters and Surface Finishers Society. 123-132
DEGNAN, C.C. and SHIPWAY, P.H., 2002. The incorporation of self-propagating, high-temperature synthesis-formed Fe-TiB2 into ferrous melts Metallurgical and Materials Transactions. A, Physical metallurgy and materials science. 33A(9), 2973-2984 SHIPWAY, P. H. and WIROJANUPATUMP, S., 2002. The role of lubrication and corrosion in abrasion of materials in aqueous environments Tribology International. VOL 35(NUMBER 10), 661-667 JONES, M., HORLOCK, A. J., SHIPWAY, P. H., MCCARTNEY, D. G. and WOOD, J. V., 2001. Microstructure and abrasive wear behaviour of FeCr-TiC coatings deposited by HVOF spraying of SHS powders Wear. VOL 249(NO 3-4), 246-253 DEGNAN, C. C., SHIPWAY, P. H. and WOOD, J. V., 2001. Elevated temperature sliding wear behaviour of TiC-reinforced steel matrix composites Wear. VOL 251(NUMBER 1-12), 1444-1451 BEAKE, B. D., LEGGETT, G. J. and SHIPWAY, P. H., 2001. Tapping mode and phase imaging of biaxially oriented polyester films Surface and Interface Analysis. VOL 31(PART 1), 39-45 BEAKE, B. D., LEGGETT, G. J. and SHIPWAY, P. H., 2001. Nanotribology of biaxially oriented poly(ethylene terephthalate) film Polymer. VOL 42(NUMBER 16), 7025-7031 JONES, M., HORLOCK, A. J., SHIPWAY, P. H., MCCARTNEY, D. G. and WOOD, J. V., 2001. A comparison of the abrasive wear behaviour of HVOF sprayed titanium carbide- and titanium boride-based cermet coatings WEAR -LAUSANNE-. VOL 251(NUMBER 1-12), 1009-1016 BLATCHFORD, M. T., JONES, M., HORLOCK, A. J., MCCARTNEY, D. G., SHIPWAY, P. H. and WOOD, J. V., 2001. Improvements in HVOF Sprayed Cermet Coatings Produced from SHS Powders THERMAL SPRAY -PROCEEDINGS-. 2001, 221-230
SHIPWAY, P.H., 2000. Production and Characterisation of HVOF Sprayed NiCr-TiC Coatings using SHS Powder Feedstock In: 1st International Thermal Spray Conference 2000. 515-522
JONES, M., HORLOCK, A. J., SHIPWAY, P. H., MCCARTNEY, D. G. and WOOD, J. V., 2000. Abrasive wear behaviour of FeCr-TiC coatings deposited by HVOF spraying of SHS powders VTT SYMPOSIUM. VOL 200, 77-86
SHIPWAY, P.H., 2000. The Role of Substrate Temperature during HVOF Spraying in Coating Residual Stress State and Abrasive Wear Performance In: 9th Nordic Symposium on Tribology (Nortrib2000). 990-999
SHIPWAY, P. H. and HODGE, C. J., 2000. Microabrasion of glass - the critical role of ridge formation WEAR -LAUSANNE-. VOL 237(NUMBER 1), 90-97 STEWART, D.A., SHIPWAY, P.H. and MCCARTNEY, D.G., 1999. Abrasive wear behaviour of conventional and nanocomposite HVOF-sprayed WC-Co coatings Wear. VOL 225/229(NUMBER 2), 789-798 SHIPWAY, P.H., 1999. Microabraision of Glass - The Interrelated Effects of Load and Abrasive Slurry Viscosity In: 21st Meeting of the IRG-OECD Group on Wear of Materials.
SHIPWAY, P. H., 1999. The role of test conditions on the microabrasive wear behaviour of soda-lime glass PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON EROSION BY LIQUID AND SOLID IMPACT. 9TH, 191-199
WIROJANUPATUMP, S. and SHIPWAY, P. H., 1999. A direct comparison of wet and dry abrasion behaviour of mild steel PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON EROSION BY LIQUID AND SOLID IMPACT. 9TH, 655-665
WIROJANUPATUMP, S. and SHIPWAY, P.H., 1999. A direct comparison of wet and dry abrasion behaviour of mild steel WEAR -LAUSANNE-. VOL 233-235(NUMBER 1), 655-665 BEAKE, B. D., LEGGETT, G. J. and SHIPWAY, P. H., 1999. Frictional, Adhesive and Mechanical Properties of Polyester Films Probed by Scanning Force Microscopy SURFACE AND INTERFACE ANALYSIS. VOL 27(NUMBER 12), 1084-1091 STEWART, D. A., SHIPWAY, P. H. and MCCARTNEY, D. G., 1998. Influence of heat treatment on the abrasive wear behaviour of HVOF sprayed WC-Co coatings Surface and Coatings Technology. VOL 105(ISSUE 1-2), 13-24 REES, G. I. and SHIPWAY, P. H., 1997. Modelling transformation plasticity during the growth of bainite under stress MATERIALS SCIENCE AND ENGINEERING -LAUSANNE- A. VOL 223(NUMBER 1/2), 168-178 SHIPWAY, P. H., WOOD, S. J. and DENT, A. H., 1997. The hardness and sliding wear behaviour of a bainitic steel Wear. VOL 203/204(NUMBER COM), 196-205 SHIPWAY, P. H. and HUTCHINGS, I. M., 1996. The role of particle properties in the erosion of brittle materials WEAR -LAUSANNE-. VOL 193(NUMBER 1), 105-113 SHIPWAY, P. H. and BHADESHIA, H. K. D. H., 1995. The effect of small stresses on the kinetics of the bainite transformation MATERIALS SCIENCE AND ENGINEERING -LAUSANNE- A. VOL 201(NUMBER 1/2), 143 SHIPWAY, P. H. and BHADESHIA, H. K. D. H., 1995. Mechanical stabilisation of bainite MATERIALS SCIENCE AND TECHNOLOGY -LONDON-. VOL 11(NUMBER 11), 1116-1128
SHIPWAY, P. H. and HUTCHINGS, I. M., 1995. Measurement of coating durability by solid particle erosion SURFACE AND COATINGS TECHNOLOGY. VOL 71(NUMBER 1), 1 SHIPWAY, P. H. and BHADESHIA, H. K. D. H., 1994. The mechanical stabilisation of Widmanstaetten ferrite MATERIALS SCIENCE AND ENGINEERING -LAUSANNE- A. VOL 223(NUMBER 1/2), 179-185 SHIPWAY, P. H. and HUTCHINGS, I. M., 1993. Attrition of brittle spheres by fracture under compression and impact loading POWDER TECHNOLOGY -LAUSANNE-. VOL 76(NUMBER 1), 23 SHIPWAY, P. H. and HUTCHINGS, I. M., 1993. Influence of nozzle roughness on conditions in a gas-blast erosion rig WEAR -LAUSANNE-. VOL 162/164(NUMBER A), 148 HUTCHINGS, I. and SHIPWAY, P., 1993. 93NM033 Improved Method of Testing Durability and Adhesion of Paints and Other Coatings ISATA -PROCEEDINGS-. 26th, 165-170
ZHANG, D., HARRIS, S. J., MCCARTNEY, D. G., SHIPWAY, P. H. and VOISEY, K. T., Developing higher strength microalloyed medium carbon steel capable of being fracture split after laser transformation notching MATERIALS SCIENCE AND TECHNOLOGY. 29(5), 616-625