Advanced Materials Research Group

Publications

Content
HANBY, B. V. T., STUART, B. W., GRANT, C., MOFFAT, J., BLISSETT, J., GERADA, C., GIMENO-FABRA, M. and GRANT, D. M., 2018. Dielectric breakdown of alumina thin films produced by pulsed direct current magnetron sputtering: Thin Solid Films Thin Solid Films. 662, 145-154

Content
WADGE, M. D., STUART, B. W., THOMAS, K. G. and GRANT, D. M., 2018. Generation and characterisation of gallium titanate surfaces through hydrothermal ion-exchange processes: Materials & Design Materials & Design. 155, 264-277

Content
GUPTA, D., HOSSAIN, K. M. Z., AHMED, I., SOTTILE, V. and GRANT, D. M., 2018. Flame-Spheroidized Phosphate-Based Glass Particles with Improved Characteristics for Applications in Mesenchymal Stem Cell Culture Therapy and Tissue Engineering: Acs Applied Materials & Interfaces Acs Applied Materials & Interfaces. 10(31), 25972-25982

Content
OWOSENI, T. A., MURRAY, J. W., PALA, Z., LESTER, E. H., GRANT, D. M. and HUSSAIN, T., 2018. Suspension high velocity oxy-fuel (SHVOF) spray of delta-theta alumina suspension: Phase transformation and tribology: Surface and Coatings Technology Surface and Coatings Technology.

Content
FELFEL, R. M., GUPTA, D., ZABIDI, A. Z., PROSSER, A., SCOTCHFORD, C. A., SOTTILE, V. and GRANT, D. M., 2018. Performance of multiphase scaffolds for bone repair based on two-photon polymerized poly(D,L-lactide-co-ɛ-caprolactone), recombinamers hydrogel and nano-HA: Materials and Design Materials and Design. 160, 455-467

Content
MACRI-PELLIZZERI, L., DE MELO, N., AHMED, I., GRANT, D., SCAMMELL, B. and SOTTILE, V., 2018. Live Quantitative Monitoring of Mineral Deposition in Stem Cells Using Tetracycline Hydrochloride: Tissue Engineering Part C-Methods Tissue Engineering Part C-Methods. 24(3), 171-178

Content
POPA, A. C., FERNANDES, H. R., NECSULESCU, M., LUCULESCU, C., CIOANGHER, M., DUMITRU, V., STUART, B. W., GRANT, D. M., FERREIRA, J. M. F. and STAN, G. E., 2018. Antibacterial efficiency of alkali-free bio-glasses incorporating ZnO and/or SrO as therapeutic agents: Ceramics International Ceramics International.

Content
FELFEL, R. M., GUPTA, D., ZABIDI, A. Z., PROSSER, A., SCOTCHFORD, C. A., SOTTILE, V. and GRANT, D. M., 2018. Performance of multiphase scaffolds for bone repair based on two-photon polymerized poly(D,L-lactide-co-epsilon-caprolactone), recombinamers hydrogel and nano-HA: Materials & Design Materials & Design. 160, 455-467

Content
CONSTANTIN, H., HARPER, L. and KENNEDY, A. R., 2018. Pressure-assisted infiltration of molten metals into non-rigid, porous carbon fibre structures: Journal of Materials Processing Technology Journal of Materials Processing Technology. 255, 66-75

Content
PARVEZ, A. M., WU, T., HONG, Y., CHEN, W., LESTER, E. H., MARETA, S. and AFZAL, M., 2018. Gasification reactivity and synergistic effect of conventional and microwave pyrolysis derived algae chars in CO2 atmosphere: Journal of the Energy Institute Journal of the Energy Institute.

Content
AL-ATTA, A., HUDDLE, T., RODRÍGUEZ, Y. G., MATO, F., GARCÍA-SERNA, J., COCERO, M. J., GOMES, R. and LESTER, E., 2018. A techno-economic assessment of the potential for combining supercritical water oxidation with ‘in-situ’ hydrothermal synthesis of nanocatalysts using a counter current mixing reactor: Chemical Engineering Journal Chemical Engineering Journal. 344, 431-440

Content

Content
LESTER, E., AVILA, C., PANG, C. H., WILLIAMS, O., PERKINS, J., GADDIPATTI, S., TUCKER, G., BARRAZA, J. M., TRUJILLO-URIBE, M. P. and WU, T., 2018. A proposed biomass char classification system: Fuel Fuel. 232, 845-854

Content
CARAMAZANA, P., DUNNE, P., GIMENO-FABRA, M., MCKECHNIE, J. and LESTER, E., 2018. A review of the environmental impact of nanomaterial synthesis using continuous flow hydrothermal synthesis: Current Opinion in Green and Sustainable Chemistry Current Opinion in Green and Sustainable Chemistry. 12, 57-62
Displaying 766 to 780 of 3850
Previous 50 51 52 53 54 Next

Advanced Materials Research Group

Faculty of Engineering
The University of Nottingham
University Park
Nottingham, NG7 2RD



email:AdvMaterials@nottingham.ac.uk