Mechanical and Aerospace Systems Research Group

Publications

Content
BONETTI R., HADJIPAKKOS P., RAE Y., HUGHES J., SUN W., 2020. A lifing method based on R5 and viscoplasticity modelling and its application to turbine rotor under thermomechanical loading Engineering Failure Analysis. 110, 104416

Content
BRETT S. J., DYSON C., MASKILL S., BRIDGES A., SUN W., 2020. An investigation of the effect of pre-straining on the creep behaviour of a P91 steel at 600oC using impression creep testing Materials Science & Engineering: A. 776, 139032

Content
BAO J.G, BENAARBIA A, BAO S.Y, GUO X.F, WANG Y.H, SUN W, 2020. High temperature strain heterogeneities tracking within hole-specimens of FV566 turbine steel via digital image Materials Science & Engineering: A. 777, 139068

Content
LI M., BENAARBIA A., MORRIS A., SUN W., 2020. Assessment of potential service-life performance for a new 9Cr steel power plant header under flexible thermomechanical operations International Journal of Fatigue. 135, 105565

Content
YAGHI A. H., HYDE T. H., BECKER A. A., SUN W., WEN W., HILSON G., SIMANDJUNTAK S., FLEWITT P. E. J., PAVIER M. J., SMITH D. J., 2020. Comparison of measured and modelled residual stresses in a welded P91 steel pipe undergoing post weld heat treatment Int. J. Pres. Ves. & Piping. 181, 104076

Content
GUPTA A., SUN W., BENNETT C. J., 2020. Simulation of small crack growth behaviour in additive manufactured Ti-6Al-4V material Continuum Mechanics and Thermodynamics. 32, 1745-1761

Content
XU X., BENAARBIA A., JEPSON M., SUN W., 2020. Investigation of microstructural evolution and creep rupture behaviour of 9% Cr MarBN steel welds Materials Science & Engineering: A. 791, 139546,

Content
BAO J., WU S., WU Z., LI F., WITHERS P.J., FU Y., SUN W., 2020. Defect evolution during high temperature tension-tension fatigue of SLM AISi10Mg alloy by synchrotron tomography Materials Science & Engineering A. 792, 139809

Content
CHEN H., AL-ABEDY H-K, LI H., YANG R., SUN W., JONES I. A., 2020. On the deformation and fracture mechanisms of the P91 steel during small punch tensile testing Materials Characterization. 168, 110514

Content
GUO X. F, BENAARBIA A., SUN W., BECKER A. A., MORRIS A., PAVIER M., FLEWITT P., TIERNEY M., WALES C., 2020. Optimization and thermal-mechanical analysis of a coated steam dual pipe system for use in advanced ultra-supercritical power plant Int. J. Pres. Ves. & Piping. 186, 104157

Content
NIE Y., LIN YUEH-JAW, WANG Y., SUN W., 2020. Coupled thermal-structural modelling and experimental validation of spiral mandrel die Journal of Advanced Manufacturing Technology. (In Press.)

Content
LI H, CHEN H., AL-ABEDY H. K., SUN W., 2020. In: Study on the Fracture Mechanism of the P91 Steel During Small Punch Tensile Testing Springer. 106-111

Content
BONETTI R., MORRIS A., SHIPWAY P. H., SUN W., 2020. The requirements for developing condition monitoring based lifing models for ageing power plant materials Int. J. Pres. Ves. & Piping. 188, 104233

Content
JEFFERSON-LOVEDAY, R. J., 2020. Enhanced Delayed Detached Eddy Simulation for Cavities and Labyrinth Seals Journal of Engineering for Gas Turbines and Power. 142(1), 011017

Content
CHADHA, S., JEFFERSON-LOVEDAY, R. and HUSSAIN, T., 2020. Modelling Knudsen number effects in suspension high velocity oxy fuel thermal spray: International Journal of Heat and Mass Transfer International Journal of Heat and Mass Transfer. 152,
Displaying 196 to 210 of 1882
Previous … 12 13 14 15 16 … Next

Mechanical and Aerospace Systems Research Group

Energy Technologies Building
The University of Nottingham, Jubilee Campus
Triumph Road, NG7 2TU


telephone: +44 (0)115 74 86398
email:mas@nottingham.ac.uk