Mechanical and Aerospace Systems Research Group

Publications

Content
GRAHAM, S., EASTWICK, C., SNAPE, C. and QUICK, W., 2017. Mechanical degradation of biomass wood pellets during long term stockpile storage: Fuel Processing Technology Fuel Processing Technology. 160, 143-151

Content
ORLA WILLIAMS, CAROL EASTWICK, SAM KINGMAN, DONALD GIDDINGS, STEPHEN LORMOR and EDWARD LESTER, 2017. Overcoming the caking phenomenon in olive mill wastes Industrial Crops and Products. 101(July 2017), 92–102

Content
BAI, X., LU, G., BENNET, T., SARROZA, A., EASTWICK, C., LIU, H. and YAN, Y., 2017. Combustion behavior profiling of single pulverized coal particles in a drop tube furnace through high-speed imaging and image analysis: Experimental Thermal and Fluid Science Experimental Thermal and Fluid Science. 85, 322-330

Content
WILLIAMS, O., EASTWICK, C., KINGMAN, S., GIDDINGS, D., LORMOR, S. and LESTER, E., 2017. Overcoming the caking phenomenon in olive mill wastes: Industrial Crops and Products Industrial Crops and Products. 101, 92-102

Content
KEVIN BERSCH, PETER H CONNOR, CAROL N EASTWICK, MICHAEL GALEA, MICHAEL GALEA and ROB ROLSTON, 2017. CFD optimisation of the thermal design for a vented electrical machine In: 2017 IEEE Workshop on Electrical Machines Design, Control and Diagnosis (WEMDCD). 39-44

Content
WILLIAMS, O., LESTER, E., KINGMAN, S., GIDDINGS, D., LORMOR, S. and EASTWICK, C., 2017. Benefits of dry comminution of biomass pellets in a knife mill: Biosystems Engineering Biosystems Engineering. 160, 42-54

Content
A.F. HASAN, C.J. BENNETT, P.H. SHIPWAY, S. CATER and J. MARTIN, 2017. A numerical methodology for predicting tool wear in Friction Stir Welding Journal of Materials Processing Technology. 241, 129-140

Content
MOHD TOBI A L, SUN W and SHIPWAY P H, 2017. Evolution of plasticity-based wear damage in gross sliding fretting of a Ti-6Al-4V non-conforming contact Tribology International. (In Press.)

Content
BARMAN K, SHIPWAY P H, VOISEY K T and PATTINSON G, 2017. Evolution of damage in MoS2-based dry film lubricants (DFLs) in fretting wear—The effect of DFL thickness and contact geometry Progress in Organic Coatings. 67-80

Content
TOBI, A. L. M., SUN, W. and SHIPWAY, P. H., 2017. Evolution of plasticity-based wear damage in gross sliding fretting of a Ti-6Al-4V non-conforming contact: Tribology International Tribology International. 113, 474-486

Content
CORTELLINO, F., ROUSE, J. P., CACCIAPUOTI, B., SUN, W. and HYDE, T. H., 2017. Experimental and Numerical Analysis of Initial Plasticity in P91 Steel Small Punch Creep Samples Experimental Mechanics. 57(8), 1193–1212

Content
CACCIAPUOTI, B., SUN, W., MCCARTNEY, D. G., MORRIS, A., LOCKYER, S., AB RAZAK, N., DAVIES, C. M. and HULANCE, J., 2017. An evaluation of the capability of data conversion of impression creep test Materials at High Temperature. 34(5-6), 415-427

Content
CHEN, H., JACKSON, G. A. and SUN, W., 2017. An Overview of Using Small Punch Testing for Mechanical Characterization of MCrAlY Bond Coats J. Thermal Spray Technology. 26(6), 1222-1238
Displaying 496 to 510 of 1882
Previous … 32 33 34 35 36 … Next

Mechanical and Aerospace Systems Research Group

Energy Technologies Building
The University of Nottingham, Jubilee Campus
Triumph Road, NG7 2TU


telephone: +44 (0)115 74 86398
email:mas@nottingham.ac.uk