Mechanical and Aerospace Systems Research Group

Publications

Content
TANAKA, YOSHIKAZU, OKO, TAKUYA, MUTSUDA, HIDEMI, POPOV, ATANAS A., PATEL, RUPESH and MCWILLIAM, STEWART, 2014. Forced vibration experiments on flexible piezoelectric devices operating in air and water environments INTERNATIONAL JOURNAL OF APPLIED ELECTROMAGNETICS AND MECHANICS. 45(1-4), 573-580

Content
PATEL, R., MCWILLIAM, S. and POPOV, A. A., 2014. Optimization of piezoelectric cantilever energy harvesters including non-linear effects SMART MATERIALS AND STRUCTURES. 23(8),

Content
MUHAMMAD, O., BENNETT, C.J. and MORVAN, H.P., 2014. Modelling of inertia friction welding using finite element analysis and computational fluid dynamics Key Engineering Materials. 611-612, 1344-1355

Content

Content
HYDE, T.H., HYDE, C.J. and SUN, W., 2013. Theoretical basis and practical aspects of small specimen creep testing Journal of Strain Analysis for Engineering Design. 48(2), 112-125

Content
WARMUTH, A.R., PEARSON, S.R., SHIPWAY, P.H. and SUN, W., 2013. The effect of contact geometry on fretting wear rates and mechanisms for a high strength steel Wear. 301(1-2), 491-500

Content
YAGHI, A. H., HYDE, T. H., BECKER, A. A. and SUN, W., 2013. Finite element simulation of welding residual stresses in martensitic steel pipes MATERIALS RESEARCH INNOVATIONS. 17(5), 306-311

Content
SUN, W., BECKER, A. A. and HYDE, T. H., 2013. Materials and structural assessment under high temperature creep and fatigue MATERIALS RESEARCH INNOVATIONS. 17(5), 298-299

Content
ROUSE, J. P., HYDE, C. J., SUN, W. and HYDE, T. H., 2013. Effective determination of cyclic-visco-plasticity material properties using an optimisation procedure and experimental data exhibiting scatter MATERIALS AT HIGH TEMPERATURES. 30(2), 117-128

Content
ROUSE, J. P., LEOM, M. Z., SUN, W., HYDE, T. H. and MORRIS, A., 2013. Steady-state creep peak rupture stresses in 90 degrees power plant pipe bends with manufacture induced cross-section dimension variations INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING. 105, 1-11

Content
CORTELLINO, F., HYDE, T. H., SUN, W. and PAPPALETTERE, C., 2013. Finite element calculation of contour integral parameters for cracked P91 pipe weld MATERIALS RESEARCH INNOVATIONS. 17(5), 300-305

Content
C. J. HYDE, T. H. HYDE, W. SUN, S. NARDONE and E. DE. BRUYCKER, 2013. Small Ring Testing of a Creep Resistant Material Materials Science and Engineering A. 586, 358-366

Content
HYDE T.H., ALI B.S.M., SUN W., 2013. Analysis and design of a small, two-bar creep test specimen Journal of Engineering Materials and Technology, Transactions of the ASME.

Content
TANNER D.W.J., SUN W., HYDE T.H., 2013. Cross-weld creep comparison of power plant steels crmov, p91 and p92 Journal of Pressure Vessel Technology, Transactions of the ASME.

Content
YAGHI A.H., HYDE T.H., BECKER A.A., SUN W., 2013. Finite element simulation of residual stresses induced by the dissimilar welding of a P92 steel pipe with weld metal International Journal of Pressure Vessels and Piping.
Displaying 871 to 885 of 1882
Previous … 57 58 59 60 61 … Next

Mechanical and Aerospace Systems Research Group

Energy Technologies Building
The University of Nottingham, Jubilee Campus
Triumph Road, NG7 2TU


telephone: +44 (0)115 74 86398
email:mas@nottingham.ac.uk