RIVERS, G., AUSTIN, J. S., HE, Y., THOMPSON, A., GILANI, N., ROBERTS, N., ZHAO, P., TUCK, C. J., HAGUE, R. J. M., WILDMAN, R. D. and TURYANSKA, L., 2023. Stable large area drop-on-demand deposition of a conductive polymer ink for 3D-printed electronics, enabled by bio-renewable co-solvents: Additive Manufacturing Additive Manufacturing. 66, CATALUCCI S, THOMPSON A, PIANO S, BRANSON D and LEACH R K, 2022. Optical metrology for digital manufacturing: A review J. Adv. Manufac. Technol. 120, 4271–4290 VILAR, N., ARTIGAS, R., BERMUDEZ, C., THOMPSON, A., NEWTON, L., LEACH, R., DUOCASTELLA, M. and CARLES, G., 2022. Optical system for the measurement of the surface topography of additively manufactured parts: Measurement Science and Technology Measurement Science and Technology. 33(10), REMANI, A., WILLIAMS, R., ROSSI, A., PEÑA, F., THOMPSON, A., DARDIS, J., JONES, N., HOOPER, P., SENIN, N. and LEACH, R., 2022. MULTI-SENSOR MEASUREMENT FOR IN-SITU DEFECT IDENTIFICATION IN METAL LASER POWDER BED FUSION CATALUCCI, S., THOMPSON, A., EASTWOOD, J., ZHANG, Z. M., BRANSON III, D. T., LEACH, R. and PIANO, S., 2022. Smart optical coordinate and surface metrology Measurement Science and Technology. 34(1), SOFIA CATALUCCI, ADAM THOMPSON, JOE EASTWOOD, ZHONGYI MICHAEL ZHANG, DAVID T BRANSON III, RICHARD K LEACH and SAMANTA PIANO, 2022. Smart optical coordinate and surface metrology Meas. Sci. Technol. 34, 012001 ZHANG, Z. M., CATALUCCI, S., THOMPSON, A., LEACH, R. and PIANO, S., 2022. Applications of data fusion in optical coordinate metrology: a review: International Journal of Advanced Manufacturing Technology International Journal of Advanced Manufacturing Technology. ZHOU X, DAI N, CHENG X, THOMPSON A and LEACH R K, 2021. Three-dimensional measurement of powder particles using X-ray computed tomography Additive Manufacturing. 40, 101913 RODRÍGUEZ SÁNCHEZ A, THOMPSON A, SENIN N, EIFLER M, HERING J and LEACH R K, 2021. Calibration of X-ray computed tomography for surface texture measurement using metrological characteristics In: Proc. 21st Int. euspen Conf..
THOMPSON A, SOUTHON N, FERN F, STUPFLER G and LEACH R K, 2021. Efficient empirical determination of maximum permissible error in coordinate metrology Meas. Sci. Technol.. 32, 106013 THOMPSON, A., RODRÍGUEZ-SÁNCHEZ, Á, SENIN, N., EIFLER, M., HERING, J. and LEACH, R., 2021. Calibration of X-ray computed tomography for surface topography measurement using metrological characteristics REMANI A, WILLIAMS R, THOMPSON A, DARDIS J, JONES N, HOOPER P and LEACH R K, 2021. Design of a multi-sensor measurement system for in-situ defect identification in metal additive manufacturing In: Proc. euspen/ASPE Advancing Precision in Additive Manufacturing.
DE PASTRE M A, THOMPSON A, SENIN N, QUINSAT Y, GARCÍA J A and LEACH R K, 2020. Polymer powder bed fusion surface texture measurement Meas. Sci. Technol.. 31, 055002 DICKINS, A., WIDJANARKO, T., SIMS-WATERHOUSE, D., THOMPSON, A., LAWES, S., SENIN, N. and LEACH, R., 2020. Multi-view fringe projection system for surface topography measurement during metal powder bed fusion: Journal of the Optical Society of America A: Optics and Image Science, and Vision Journal of the Optical Society of America A: Optics and Image Science, and Vision. 37(9), B93-B105 DICKINS, A., WIDJANARKO, T., SIMS-WATERHOUSE, D., THOMPSON, A., LAWES, S., SENIN, N. and LEACH, R., 2020. Multi-view fringe projection system for surface topography measurement during metal powder bed fusion: Journal of the Optical Society of America A: Optics and Image Science, and Vision Journal of the Optical Society of America A: Optics and Image Science, and Vision. 37(9), B93-B105 THOMPSON A, SENIN N and LEACH R K, 2019. Case studies in X-ray computed tomography surface texture measurement In: Proc. 22nd Met. & Props, Lyon, France, Jul..
THOMPSON A, SENIN N, MASKERY I, KORNER L, LAWES S and LEACH R K, 2018. Internal surface measurement of metal powder bed fusion parts Additive Manufacturing. 20, 126-133 TOWNSEND, A., RACASAN, R., LEACH, R., SENIN, N., THOMPSON, A., RAMSEY, A., BATE, D., WOOLLIAMS, P., BROWN, S. and BLUNT, L., 2018. An interlaboratory comparison of X-ray computed tomography measurement for texture and dimensional characterisation of additively manufactured parts: Additive Manufacturing Additive Manufacturing. 23, 422-432 THOMPSON A, KÖRNER L, SENIN N, LAWES S, MASKERY I and LEACH R K, 2017. Measurement of the internal surface texture of additively manufactured parts by X-ray computed tomography In: 7th Conf. Industrial Computed Tomography (Leuven, Belgium).
THOMPSON A, MCNALLY D, MASKERY I and LEACH R K, 2017. X-ray computed tomography and additive manufacturing in medicine: a review Int. J. Metrol. Qual. Eng.. 8, 17 TOWNSEND A, RACASAN R, BILLS P, THOMPSON A, SENIN N, LEACH R K and BLUNT L A, 2017. Results from an interlaboratory comparison of areal surface texture parameter extraction from x-ray computed tomography of additively manufactured parts In: Proc. 17th Int. euspen Conf., Hannover, Germany, Jun. 386-387
GOMEZ, C., SU, R., THOMPSON, A., DISCIACCA, J., LAWES, S. and LEACH, R., 2017. Optimization of surface measurement for metal additive manufacturing using coherence scanning interferometry: Optical Engineering Optical Engineering. 56(11), HYDE C, XU Z, THOMPSON A, LEACH R K, MASKERY I, TUCK C and CLARE A, 2017. On the use of X-ray computed tomography for monitoring the failure of a two-bar small specimen manufactured by selective laser melting In: SFF Symp. 2017.
XU, Z., HYDE, C. J., THOMPSON, A., LEACH, R. K., MASKERY, I., TUCK, C. and CLARE, A. T., 2017. Staged thermomechanical testing of nickel superalloys produced by selective laser melting: Materials and Design Materials and Design. 133, 520-527 THOMPSON A, MASKERY I and LEACH R K, 2016. X-ray computed tomography for additive manufacturing: a review Meas. Sci. Technol.. 27, 072001 THOMPSON A, SENIN N and LEACH R K, 2016. Towards an additive surface atlas In: Proc. ASPE Summer Topical, Rayleigh, NC, USA, Jun. 156-161