Centre for Doctorial Training in Additive Manufacturing and 3D Printing
University of Nottingham
  
The Advanced Manufacturing Building is located at the Jubilee campus

Finding us

We are located in the Advanced Manufacturing Building (building no.59 on the campus map), near the South entrance of the Jubilee Campus.

Directions to and from the Jubilee Campus

Between campuses

By Hopper Bus (free service): 

The University operates a Hopper Bus Service between Jubilee Campus, University Park, Sutton Bonington Campus and Royal Derby Hospital Centre. You can view the Hopper Bus timetables online.

By Cycle

All our campuses have cycle parking facilities and those within the City have links to numerous cycle paths.

From Nottingham (approximately 2.5 miles)

By public bus service:

There are a number of public services that run close to or through our campuses. For further details on public bus services to The University of Nottingham click here

By taxi:

There are taxi ranks throughout the City Centre and immediately adjacent to the main railway and bus stations. The journey to the campus takes about 10 minutes.

From East Midlands Airport (approximately 13 miles)

From East Midlands Airport you can take the Skylink service, run by Trent Barton, towards the City Centre. Buses leave from outside the Airport Arrivals hall.

You can also walk to the taxi rank on the terminal forecourt and take a direct taxi to the University. The cost of a single/one way journey is approximately £25. Taxis are normally available 24 hours.

From M1 motorway

By car :

Leave the M1 motorway at Junction 25 to join the A52 to Nottingham. Take the second exit at The Priory roundabout (about 4 miles from M1) and join A6200. Pass the Queens Medical Centre (QMC) and turn left in the South entrance of the Jubilee Campus. The Advanced Manufacturing Building is just 1 minute away from the QMC. 

Car parking on campus information 

 

Contact

EPSRC Centre for Doctoral Training in Additive Manufacturing and 3D Printing
 
Faculty of Engineering
Advanced Manufacturing Building 
Jubilee Campus
Nottingham
NG7 2GX
 
Email: CfAM@nottingham.ac.uk
 

Download Map

Jubilee Map
 
 

Centre for Doctoral Training in Additive Manufacturing and 3D Printing

Email: amcdt@nottingham.ac.uk