New helicopter wing structure for Airbus Helicopters' rotorcraft demonstrator launched at Paris Air Show

ASTRAL Project--EXPH-1710-5--445 x 124
20 Jun 2017 10:00:00.000

The Institute for Advanced Manufacturing (IfAM) at the University of Nottingham has led groundbreaking research into the development of a new wing structure that will provide Airbus Helicopters’ Racer High Speed Helicopter Demonstrator with enhanced speed and range to complete advanced missions. The new “box-wing” structure was showcased today when Guillaume Faury, CEO of Airbus Helicopters, unveiled a model of the demonstrator, codenamed Racer for Rapid and Cost-Effective Rotorcraft, at the Paris Air Show.

The University’s Advanced Wing Structure for Rotorcraft Additional Lift (ASTRAL) Project is run in collaboration with GE Aviation, with Airbus Helicopters as the Work Area Leader. It is funded by the EU through the Clean Sky 2 (CS2) Joint Undertaking. Clean Sky is the largest European research programme which develops innovative, cutting edge technology aimed at reducing CO2 and NOx emissions and noise levels produced by aircraft, and improving the competitiveness of European industry.

The ASTRAL Project forms an important element in the drive to achieve lower emissions and has led to this design of a more efficient helicopter wing with optimised control surfaces and systems to meet the objectives of CS2.

Click here for full story

Each new wing on the Racer has been designed with high performance ecological materials that reduce the weight of the aircraft. The new wings enhance the helicopter’s performance by providing additional vertical lift and the ability to fly further and faster than traditional helicopters can today.

These factors will make the operational model ideal for a wide range of missions which call for increased speed and efficiency such as medical evacuations, search and rescue operations, as well as public services, commercial air transport and private aviation.

In addition, the innovative wing has been designed with novel manufacturing processes which make it possible to manufacture complex products like these in high labour cost countries.

Tomasz Krysinski, Head of Research and Innovation at Airbus Helicopters, commented, “We are extremely happy to have the University of Nottingham among our partners for the new Racer High Speed Rotorcraft Demonstrator. The University’s world-leading expertise and resources in engineering, advanced manufacturing and materials, and aerospace technology, have given us a leading edge to ensure we provide an outstanding high speed helicopter to our customers, which meets exacting standards of performance, quality and safety.” 

Speaking about IfAM’s involvement in the project, Professor Svetan Ratchev, Director of IfAM and the ASTRAL project coordinator, said, “We are thrilled to be part of this pioneering programme to deliver an advanced aircraft platform that will ensure competitive and green aviation and deliver important high value manufacturing jobs in Europe. Working in close collaboration with Airbus Helicopters and GE Aviation, the University of Nottingham team is uniquely positioned to contribute to the development of both the groundbreaking wing design and manufacturing technologies for the new Racer High Speed Rotorcraft.”

Paul Mandry, Engineering Project Lead for GE Aviation, added, “GE Aviation is proud to collaborate with the University of Nottingham to support the launch of Airbus Helicopters’ new Racer High Speed Rotorcraft Demonstrator. The ASTRAL project leverages the expertise of GE Aviation’s Hamble team in aircraft structures, enabling us to contribute to achievements in aircraft performance improvements. This is critical to increasing affordability in air travel and meeting Paul Mandry, Engineering Project Lead for GE Aviation, added, “GE Aviation is proud to collaborate with the University of Nottingham to support the launch of Airbus Helicopters’ new Racer High Speed Rotorcraft Demonstrator. The ASTRAL project leverages the expertise of GE Aviation’s Hamble team in aircraft structures, enabling us to contribute to achievements in aircraft performance improvements. This is critical to increasing affordability in air travel and meeting stringent environmental targets that affect almost every aspect of the overall performance of the air transportation system.”

The research is expected to set the standard for aerodynamic efficiency in high speed helicopters. It will also bring about a host of benefits including lighter, high performance, more affordable and easier to fabricate wing structures for aircraft. These benefits will improve resource-­efficiency and therefore have a positive ecological impact.

 The ASTRAL Project has a strong potential for long-term industrial and commercial exploitation of its results. Beyond the end of the project, the Racer demonstrator will be used as a fundamental element to accelerate the transfer of the key wing design, manufacture and assembly technologies to the industry at large.

— Ends —

Our academics can now be interviewed for broadcast via our Media Hub, which offers a Globelynx fixed camera and ISDN line facilities at University Park campus. For further information please contact a member of the Communications team on +44 (0)115 951 5798, email mediahub@nottingham.ac.uk or see the Globelynx website for how to register for this service.

For up to the minute media alerts, follow us on Twitter

Notes to editors: 

The University of Nottingham is a research-intensive university with a proud heritage, consistently ranked among the world's top 100. Studying at the University of Nottingham is a life-changing experience and we pride ourselves on unlocking the potential of our 44,000 students - Nottingham was named University of the Year for Graduate Employment in the 2017 Times and Sunday Times Good University Guide, was awarded gold in the TEF 2017 and features in the top 20 of all three major UK rankings. We have a pioneering spirit, expressed in the vision of our founder Sir Jesse Boot, which has seen us lead the way in establishing campuses in China and Malaysia - part of a globally connected network of education, research and industrial engagement. We are ranked eighth for research power in the UK according to REF 2014. We have six beacons of research excellence helping to transform lives and change the world; we are also a major employer and industry partner - locally and globally.

Impact: The Nottingham Campaign, its biggest-ever fundraising campaign, is delivering the University’s vision to change lives, tackle global issues and shape the future. More news…

 

Story credits

More information is available from Prof Svetan Ratchev, Director of the Institute for Advanced Manufacturing on +44 (0)115 951 4018, svetan.ratchev@nottingham.ac.uk or Shirlene Campbell Ritchie, Media Relations Manager at The University of Nottingham, on +44 (0)115 846 7156, shirlene.campbellritchie@nottingham.ac.uk 
Shirlene Campbell Ritchie

Shirlene Campbell Ritchie MCIPR - Media Relations Manager (Faculty of Engineering)

Email: shirlene.ritchie@nottingham.ac.uk  Phone: +44 (0)115 846 7156  Location: University Park

Additional resources

No additional resources for this article

Media Relations - External Relations

The University of Nottingham
YANG Fujia Building
Jubilee Campus
Wollaton Road
Nottingham, NG8 1BB

telephone: +44 (0) 115 951 5798
email: pressoffice@nottingham.ac.uk