Centre for Additive Manufacturing
Advanced Manufacturing Building

Directions to the Centre for Additive Manufacturing

The Centre for Additive Manufacturing (CfAM) is located in the Advanced Manufacturing Building (building no.59 on the campus map), next to the South entrance of Jubilee Campus at the University of Nottingham.

Directions to and from the Jubilee Campus

By Hopper Bus (free service)
The University operates a Hopper Bus Service between Jubilee Campus, University Park, Sutton Bonington Campus and Royal Derby Hospital Centre. You can view the Hopper Bus timetables online.

By public bus service (From Nottingham city centre)
There are a number of public services that run close to or through our campuses. For further details on public bus services to The University of Nottingham click here

By taxi
There are taxi ranks throughout the City Centre and immediately adjacent to the main railway and bus stations. The journey to the campus takes about 10 minutes.

By car (from M1 motorway)
Leave the M1 motorway at Junction 25 to join the A52 to Nottingham. Take the second exit at The Priory roundabout (about 4 miles from M1) and join A6200. Pass the Queens Medical Centre (QMC) and turn left in the South entrance of the Jubilee Campus. The Advanced Manufacturing Building is just 1 minute away from the QMC. Car parking on campus information.

By train 
Nottingham train station is the preferred alternative. The station is located in Nottingham city centre and well connected to the campus via bus services or taxi.

By plane (East Midlands airport)
From East Midlands Airport you can take the Skylink service, run by Trent Barton, towards Nottingham City Centre. Buses leave from outside the Airport Arrivals hall. 

Alternatively, you can also walk to the taxi rank on the terminal forecourt and take a direct taxi to the University. Taxis are normally available 24 hours.The distance from East Midlands Airport is approximately 13 miles.

Contact

Centre for Additive Manufacturing

 
Faculty of Engineering
Advanced Manufacturing Building 
Jubilee Campus
Nottingham
NG7 2GX

Email: CfAM@nottingham.ac.uk

 

Download Map

Jubilee Map
 
 

Centre for Additive Manufacturing

Faculty of Engineering
The University of Nottingham
Nottingham, NG7 2RD


email: CfAM@nottingham.ac.uk