Title | Speaker | Event | Date | Venue |
Surface and Interface Controlled Zero-Dimensional Nanomaterials for Advanced Printed Electronics |
Dr Jisun Im |
2022 Materials Research Society Fall Meeting & Exhibit |
Nov 2022 |
Boston, US |
My journey from the Middle East to Occident: How Computational Mechanics empowers surfing the ‘wind of change’. |
Dr Negar Gilani |
Ada Lovelace Day |
Oct 2022 |
Nottingham, UK |
Beyond Structure – enabling 21st Century products through the 3D Deposition of Functional Materials |
Prof Richard Hague |
Swiss ePrint 2022: The Swiss Conference on Printed Electronics and Functional Materials |
Sept 2022 |
Buchs, Switzerland |
Two photon polymerization for manufacturing three-dimensional metamaterials |
Dr Jisun Im |
Bulk and Surface Metamaterials Showcase 2022 |
Sept 2022 |
Online |
Microfabrication by additive manufacturing |
Dr Feiran Wang |
XXII School on Experimental Nuclear Physics - Gas Electron Multipliers: Fundamentals and applications |
Jul 2022 |
Sao Paulo, Brazil (online) |
The effect of a plasticiser on the printability and solubility of a poorly soluble drug in a 3D printed tablet |
Maria Ines Evangelista Barreiros |
Controlled Release Society (CRS) Annual Meeting 2022 |
Jul 2022 |
Montreal, Canada |
Additive manufacture of vascularised bioactive scaffold for bone tissue engineering |
Nur Rofiqoh Eviana Putri |
Tissue Engineering & Regenerative Medicine Society (TERMIS)-EU Chapter Conference 2022 |
Jun 2022 |
Krakow, Poland |
Implementing SLA Printing to Understand Matrix Mesh Size Influence on Biomacromolecule Release |
Kristian Plender |
United Kingdom and Ireland Controlled Release Society (UKICRS) Symposium 2022 |
Jun 2022 |
Manchester, UK |
3D Printed fenofibrate tablets using direct powder printing (oral presentation) |
Maria Ines Evangelista Barreiros |
13th World Meeting on Pharmaceutics, Biopharmaceutics and Pharmaceutical Technology (PBP) |
Mar 2022 |
Rotterdam, Netherlands |
The importance of exploring the rheological properties of formulation inks for 3D printing dosage form manufacture (poster) |
Maria Ines Evangelista Barreiros |
13th World Meeting on Pharmaceutics, Biopharmaceutics and Pharmaceutical Technology (PBP) |
Mar 2022 |
Rotterdam, Netherlands |
Interface analysis of the new gold conductive ink formulation |
Tien Thuy Quach |
The Forge, Particle Characterization in Formulation 2022 |
Mar 2022 |
Belfast, NI |
Additive manufacture of vascularised hybrid scaffolds for bone tissue engineering (flash poster) |
Nur Rofiqoh Eviana Putri |
16th Annual Meeting RSC Biomaterials Chemistry Group |
Jan 2022 |
Online |
Additive Manufacture of Vascularised Hybrid Scaffolds for Bone Tissue Engineering |
Nur Rofiqoh Eviana Putri |
Tissue & Cell Engineering Society (TCES) 2021 Virtual Conference |
July 2021 |
Edinburgh, UK (online) |
Secondary ion mass spectrometry applications in highly multidisciplinary research |
Gustavo F Trindade |
USP LAMFI seminar series |
June 2021 |
Sao Paulo, Brazil (Online) |
Micro/nanoscale characterisation of the interfaces of 3D-printed multimaterials |
Tien Thuy Quach |
PGR Seminar, Centre for Additive Manufacturing University of Nottingham |
May 2021 |
Nottingham, UK (online) |
Surface analysis of degraded GEMs |
Gustavo F Trindade |
USP-UFF-UoN-CERN MPGD meeting |
May 2021 |
Nottingham, UK (online) |
3D Electronics: Building Blocks for 3D Printed Sensors and Computers |
Geoff Rivers, Jisun Im & Fieran Wang |
Additive International Spotlight Event: Advances in Multi-Material, Multifunctional Additive Manufacturing for 3D Printed Electronics and Pharmaceuticals |
Mar 2021 |
Nottingham, UK (Online) |
Modelling for (multi) functionality – understanding how to optimise deposition in 3D |
James Sprittles |
Additive International Spotlight Event: Advances in Multi-Material, Multifunctional Additive Manufacturing for 3D Printed Electronics and Pharmaceuticals |
Mar 2021 |
Nottingham, UK (Online) |
Hot metal: how do we develop ‘colour’ metal printing? |
Nesma Aboulkhair |
Additive International Spotlight Event: Advances in Multi-Material, Multifunctional Additive Manufacturing for 3D Printed Electronics and Pharmaceuticals |
Mar 2021 |
Nottingham, UK (Online) |
Can we print pills? Advances in multi-material 3D inkjet printing for pharmaceutical devices |
Yinfeng He |
Additive International Spotlight Event: Advances in Multi-Material, Multifunctional Additive Manufacturing for 3D Printed Electronics and Pharmaceuticals |
Mar 2021 |
Nottingham, UK (Online) |
Understanding how multi-materials interact: Novel multiscale chemical and physical analysis techniques for multifunctional AM |
Gustavo F Trindade |
Additive International Spotlight Event: Advances in Multi-Material, Multifunctional Additive Manufacturing for 3D Printed Electronics and Pharmaceuticals |
Mar 2021 |
Nottingham, UK (online) |
Micro/nanoscale characterisation for the next generation 3D printed multimaterials (poster) |
Tien Thuy Quach |
The FORGE: Characterization of Pharmaceutical Formulations |
Mar 2021 |
Nottingham, UK (online) |
Micro/nanoscale analyses of the interfaces of the next generation 3D printed multimaterials (poster) |
Tien Thuy Quach |
Formative Formulation 2 Conference |
Mar 2021 |
Nottingham, UK (online) |
ToF-SIMS to measure residual metal nanoparticle stabiliser in 3D printed electronics |
Gustavo F Trindade |
SIMS Workshops, University of Nottingham |
Feb 2021 |
Nottingham, UK (Online) |
Micro/nanoscale characterisation of the interfaces of 3D-printed multimaterials |
Tien Thuy Quach |
Polymer Club
University of Nottingham
|
Feb 2021 |
Nottingham, UK (online) |
3D-printing of medicines and implants: making the formulations work |
Clive Roberts |
12th World Meeting on Pharmaceutics and Biopharmaceutics |
Postponed to Feb 2021 |
Vienna, Austria |
Developing micro/nanoscale analyses for next generation multi-functional 3D printed products (poster) |
Tien Thuy Quach |
Allied Health Professional Postgraduate Research Conference 2021, University of Nottingham |
January 2021 |
Nottingham, UK (Online) |
Additive manufacture of vascularised biocompatible scaffolds for bone tissue engineering (poster) |
Nur Rofiqoh Eviana Putri |
RSC Biomaterials Chemistry Group Annual Meeting |
January 2021
|
Nottingham, UK (online) |
Micro/nanoscale characterisation for the next-generation 3D-printed multi-materials (poster) |
Tien Thuy Quach |
Seminar at Division of Advanced Materials and Health Technologies (AMHT), University of Nottingham |
December 2020
|
Nottingham, UK (online) |
Free Surface Nanoflows |
James Sprittles |
Lawrence Berkeley National Laboratory |
November 2020
|
Berkeley, CA, USA (online) |
Free Surface Nanoflows |
James Sprittles |
Imperial College London |
November 2020
|
Online |
Bouncing off the Walls: The Influence of Gas-Kinetic and van der Waals Effects in Drop Impact |
James Sprittles |
The annual meeting of the Division of Fluid Dynamics of the American Physical Society (APS DFD 2020) |
November 2020
|
Chicago IL, USA (online) |
Control of High-temperature Drop-on-demand Metal Jetting through Numerical Modelling and Experimentation |
Negar Gilani |
Material Science and Technology (MS&T20) |
November 2020
|
Online |
Continuum models of nanoscale effects in initial stages of droplet spreading |
Mykyta Chubynsky |
The annual meeting of the Division of Fluid Dynamics of the American Physical Society (APS DFD 2020) |
November 2020
|
Online |
Invited set of seminars on Nanomaterials |
Lyudmila Turyanska |
University of Lincoln |
University of Lincoln
|
Lincoln, UK (online) |
Processing multiple mass spectrometry depth profiling datasets with simsMVA |
Gustavo F Trindade |
SIMS Workshops |
October 2020
|
Nottingham, UK (online) |
Modelling additive manufacturing by two-photon polymerisation |
Mykyta Chubynsky |
Printing for Fabrication conference |
October 2020
|
Online |
Discussion panel member: Realising your quantum ambitions - a super position to be in? |
Mark Fromhold |
SPIE Photonex and Vacuum Expo 2020 |
October 2020
|
Online |
Designing and optimising micro/nanoscale characterisation methodologies for next-generation multi-functional 3D-printed products |
Tien Thuy Quach |
East Midlands Doctoral Network Conference |
September 2020
|
Leicester, UK (online) |
Matrix Augmentation of Mass Spectrometry imaging datasets |
Gustavo F Trindade |
SIMS Workshops |
September 2020
|
Nottingham, UK (online) |
Enabling Next Generation Additive Manufacturing (Research Challenge 1) |
Gustavo F Trindade |
Departmental seminar, University of Sao Paulo |
July 2020
|
Sao Paulo, Brazil (online) |
Multivariate analysis of Secondary Ion Mass Spectrometry data |
Gustavo F Trindade |
SIMS Workshops |
May 2020
|
Nottingham, UK (online)
|
Keynote speaker: 3D Printing of Medicines: a practical reality for manufacture |
Clive Roberts |
International Conference and Exhibition on Pharmaceutical Sciences and Technology 2020 |
May 2020
|
Bangkok, Thailand(online) |
The Promise of 3D Printing in Pharmaceuticals and Dietary Supplements |
Clive Roberts |
United States Pharmacopeia Conference 2020 |
May 2020
|
Online |
Enabling Next Generation Additive Manufacturing: the 3D Deposition of Functional Materials for the Additive Manufacturing of Smart Devices |
Richard Hague |
International Conference on Research Advances in Additive Manufacturing (RAAM) |
March 2020 Postponed
|
Nanjing, China |
Thermal Fluctuations in Free Surface Nanoflows |
James Sprittles |
DAMTP |
March 2020
|
Cambridge, UK |
On the interaction and forms of adhesion between various substrate materials and molten metal droplets produced by the drop-on-demand technology MetalJet |
Nesma Aboulkhair |
TMS2020 |
Feburary 2020 |
San Diego, California, USA |
Thermal Fluctuations in Free Surface Nanoflows |
James Sprittles |
IAM Seminar |
Janurary 2020 |
Oxford, UK |
Low-temperature sintering of inkjet printed metal nano particles for additive manufacturing: chemical and morphological assessment |
Gustavo F Trindade |
Materials Research Society (MRS) Fall 2019 Conference |
December 2019 |
Boston, USA |
Three-dimensional plasmonic nano-composites fabrication by two-photon lithography based 3D printing (poster) |
Qin Hu |
Materials Research Society (MRS) Fall 2019 Conference |
December 2019 |
Boston, USA |
High Throughput Screening of inks for inkjet 3D printing of multi-functional drug delivery implants |
Derek Irvine |
37 Auatralasian Polymer Society |
November 2019 |
Queensland, Australia |
3D printing acrylate-thiol nanocomposites by two-photon lithography and functionalisation by au nanoparticles (poster) |
Qin Hu |
Polymer Research Symposium 2019 |
November 2019 |
Nottingham, UK |
Production of multi-functional devices by reactive material jetting |
Yinfeng He |
Polymer Research Symposium 2019 |
November 2019 |
Nottingham, UK |
Applications of 3D printing graphene and other low dimensional materials |
Feiran Wang |
Technology Innovation, Entrepreneurship and Creativity Forum |
November 2019 |
Chongqing, China |
Components and sub-systems for cold-atom quantum sensors |
Mark Fromhold |
Photonex Europe |
October 2019 |
Coventry, UK |
Novel biomaterials for inkjet 3D printing drug delivery implants |
Laura Ruiz Cantu |
Biofabrication 2019 |
October 2019 |
Ohio, USA |
Advanced surface and interface analysis to enable next generation additive manufacturing |
Gustavo F Trindade |
The Enlighten Conference |
October 2019 |
Coventry, UK |
Jetting of high temperature metals using the novel droplet-on-demand technology ‘Metaljet’ |
Nesma Aboulkhair |
Materials Science and Technology (MS&T) 2019 |
Sept-Oct 2019 |
Portland, OR, US |
Plenary Lecture: The potential of 3D printing in the development and manufacture of medicines and its impact upon pharmacy |
Clive Roberts |
UK Academy of Pharmaceutical Sciences PharmSci 2019 |
September 2019 |
London, UK |
Nanoscale Free Surface Flows: Modelling Beyond Navier-Stokes |
James Sprittles |
SFB-TRR-75 German Summer Programme |
September 2019 |
Stuttgart, Germany |
Developing materials for inkjet 3D printed drug delivery and biomedical devices |
Yinfeng He |
APV: Making Science Work: 3D Printing in Pharma – 4 years after the first FDA approval: where are we now? |
September 2019 |
Antwerp, Belgium |
An experimental ‘litmus test’ for contact-line models and some new challenges |
Yulii D. Shikhmurzaev |
International Workshop “Challenges in Nanoscale Physics of Wetting Phenomena” |
August 2019 |
Dresden, Germany |
3D printing manufacture of medicines: formulation and material challenges |
Clive Roberts |
iPharma 3rd Global Pharmaceutical Expo and Conference |
July 2019 |
London, UK |
Jetting of high temperature metals using the droplet-on-demand technology ‘Metaljet’ |
Nesma Aboulkhair |
Additive International Summit (2019) |
July 2019 |
Nottingham, UK |
Characterisation of metallic material produced using the novel droplet- on-demand technology ‘Metaljet’ |
Nesma Aboulkhair |
International Conference on Advanced Computational Engineering and Experimenting (ACEX) 2019 |
July 2019 |
Athens, Greece |
Novel biomaterials for inkjet 3D printing drug delivery implants |
Laura Ruiz Cantu |
Tissue and Cell Engineering Society (TCES) 2019 |
June 2019 |
Nottingham, UK |
Lifetime of ultracold atom clouds near 2D materials |
Mark Fromhold |
41st Photonics and Electromagnetics Research Symposium (PIERS) |
June 2019 |
Rome, Italy |
Modelling Nanoscale Effects in Drop Impact & Spreading |
James Sprittles |
Seminar at University of Leicester |
March 2019 |
Leicester, UK |
A multi-scale computational model to predict the performance of cell seeded scaffolds with triply periodic minimal surface geometries |
Eric Lehder |
30th Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference |
January 2019 |
Austin, Texas, USA |
Modelling Nanoscale Effects in Drop Impact & Spreading |
James Sprittles |
Seminar at Center for Smart Interfaces |
December 2018 |
Darmstadt, Germany |
Advanced materials characterisation to enable next generation additive manufacturing (poster) |
Gustavo F Trindade |
Institute of Physics (IOP) - Science of Printing 2018 |
November 2018 |
London, UK |
3D printing manufacture of medicines: formulation and material challenges |
Clive Roberts |
Annual Scientific Meeting of the Gattefossé Foundation |
September 2018 |
St-Rémy de Provence, France |
Advanced materials characterisation to enable next generation additive manufacturing (poster) |
Gustavo F Trindade |
SIMS Europe 2018 |
September 2018 |
Muenster, Germany |
Synthesis of Dispersant Coated Fillers Designed to Improve the Ultrasound Response of Biocomposites |
Derek Irvine |
ACS Fall Meeting |
August 2018 |
Boston, USA |
Focus session on Casimir effect and heat transfer |
Mark Fromhold |
PIERS 2018 conference |
August 2018 |
Toyama, Japan |
Invited seminar on 3D printing of medicines |
Clive Roberts |
Tasly Pharmaceutical International Co.,Ltd meeting |
July 2018 |
Nottingham, UK |
Synthesis of Bespoke Antimicrobial Monomers and Polymers Using High Throughput Synthesis |
Derek Irvine |
Macro18 |
July 2018 |
Cairns, Australia |
3D Deposition of Functional Materials for the Additive Manufacturing of Smart Devices |
Richard Hague |
TTCP Functional Additive Manufacturing Workshop |
March 2018 |
Vancouver, Canada |
Enabling Next Generation Additive Manufacturing: the 3D Deposition of Functional Materials for the Additive Manufacturing of Smart Devices - a UK perspective |
Richard Hague |
TMS 2018 |
March 2018 |
Phoenix, Arizona, USA |
Invited seminar on 3D printing of medicines |
Clive Roberts |
Quotient (Clinical) Sciences meeting |
January 2018 |
Nottingham, UK
|